Examples of 'etching mask' in a sentence
Meaning of "etching mask"
An etching mask is a protective layer applied to a surface during the etching process, which involves removing specific areas of the surface material. The mask acts as a barrier, preventing the etching solution from affecting the protected areas. It is commonly used in various industries, such as electronics, manufacturing, and metalworking, to create precise patterns or designs on surfaces
How to use "etching mask" in a sentence
Basic
Advanced
etching mask
There is even no need for an etching mask.
The second etching mask is eliminated.
Removal of the second etching mask.
The etching mask is eliminated above the first active area.
Removing the second etching mask.
Providing the etching mask for exposing the Coriolis tube through etching.
Only the geometry of the etching mask changes.
The etching mask M is then removed.
And removing said etching mask.
Thus, an etching mask for printing is prepared.
The resin layer is used to produce an etching mask already described.
Forming an etching mask on the first conductive layer ;.
Lateral spacers are formed around the salient pattern defining a third etching mask.
The constraints on the etching mask may thus be relaxed.
The uncovered area is then etched using the second pattern as etching mask.
See also
The catalyst layer is used as an etching mask for the etching step.
Second etching mask 6 is also called hard mask.
The first layer then acts as barrier layer or etching mask for the second layer.
The etching mask further fills in dicing paths 9.
The voids are also present in etching mask 8.
Second etching mask 6 is for example a photoresist or a material of different nature.
The hard mask is patterned so as to form etching mask 8.
Second etching mask 3 is deposited on the substrate so as to partially cover the substrate.
Etching of the substrate through the secondary etching mask 5.
This then results in formation of an etching mask within dielectric material layer 3.
In another alternative method, it is possible not to use any etching mask.
Third etching mask 8 is then selectively eliminated with respect to covering material 3.
Gate dielectric, an insulating layer and an etching mask are formed on substrate.
The effect of first etching mask 4 on definition of second etching mask 6 is thus reduced.
The upper metal mirror 3 is then used directly as an etching mask.
The design of first etching mask 4 comes directly from the design of a photoresist mask.
On completion of this step, pickling can be done to delete the etching mask.
The first partial etching enables third etching mask 7 to be defined under the best conditions.
This also prevents formation of parasite patterns in third etching mask 8.
Second etching mask 6 also defines a main area C and a secondary area D on covering layer 3.
The effect of first mask 1 on the definition of second etching mask 3 is thereby reduced.
First etching mask 4 defines a main area A and a secondary area B on first material 2.
The photosensitive resin layer is therefore directly used in order to form the etching mask 8.
An etching mask is then formed in a resin layer 12.
In this case, the heat-sensitive material layer forms an etching mask for the substrate.
A third etching mask 8 is formed on second covering material 7.
This etching step forms a pattern of covering material 3 defined from the pattern of etching mask 4.
Etching mask 16 is produced by means of any suitable technique.
This layer serves as an etching mask to delineate the layer 10.
Etching mask 11 has also been eliminated to reach support substrate 1.
For this, a tertiary etching mask 7 is deposited on the substrate 1.
First protective mask 1 is thus covered by second etching mask 3.
Formation of an etching mask on the patterned upper layer, consisting,.
As in the previous embodiments, gate material 6 is patterned by means of etching mask 8.
First etching mask 4 is formed on the layer of first material 2.
You'll also be interested in:
Examples of using Etching
Show more
Etching of plastic substrates prior to their metalization
I will buy an etching for your father
Etching of plastic substrates prior to their metallization
Examples of using Mask
Show more
A subnet mask is a bit mask used for
Then go and get your gas mask
I removed my mask as a gesture of remorse but my it was to no avail
