Examples of 'expressed in db' in a sentence
Meaning of "expressed in db"
expressed in db: This phrase indicates that something is measured or quantified in decibels, often used when describing sound levels or intensities
How to use "expressed in db" in a sentence
Basic
Advanced
expressed in db
The image rejection ratio is usually expressed in dB.
Expressed in dB relative to incident power.
Differences in suppression effect values are expressed in dB in the majority of studies.
Expressed in dB.
Here the gains are expressed in dB.
Where Lfsl is expressed in dB and D is in kilometres and f is in MHz.
Of output power and is expressed in dB.
It is expressed in dB.
The vertical scale corresponds to the spectral density expressed in dB.
This often is expressed in dB.
PSNR expresses its result as a ratio of the peak signal expressed in dB.
The quality criterion CQ expressed in dB is plotted up the ordinate axis.
Losses between the emission rack and the antenna expressed in dB.
The noise level expressed in dB ( decibels ) for each frequency represents the noise spectrum.
Antenna gain is usually expressed in dB.
See also
The ability of a circuit or component to reject interference, usually expressed in dB.
IMD is usually expressed in dB.
Energy dissipated without accomplishing useful work, usually expressed in dB.
The results of measurements shall be expressed in dB microvolts / m microvolts / m.
Subsequently, the values of the gain, attenuation and signal levels are expressed in dB.
Usually it is expressed in dB or %.
Quite often, a sound contractor will have to add power levels expressed in dB.
The amplification ratio is expressed in dB ( similar to IIR filter ).
The output signal acmp from the converter 20 proportional to the amplitude expressed in dB.
The quality-to-price ratio criterion CQ 2 expressed in dB is plotted up the ordinate axis.
Loss: Energy dissipated without accomplishing useful work, attenuation, usually expressed in dB.
The measured results are expressed in dB (microvolts/m).
This is the deterioration of the signal to noise ratio ( S / N ) expressed in dB.
Typically the CMRR is expressed in dB.
K2 correction term for the test area, expressed in dB.
In a given bandwidth, expressed in dB.
A front-to-back ratio is usually expressed in dB.
The daily personal noise exposure of a worker is expressed in dB ( A ) using the formula, r.
The portion Blog ( FOM DCF ) is also expressed in dB.
All these quantities are expressed in dB.
Attenuation is typically expressed in dB.
The MAXIMUM TPR is commonly expressed in dB.
Since this is a ratio, it is expressed in dB.
Note: The CNR is usually expressed in dB.
All variables in Equation ( 2 ) are expressed in dB.
You'll also be interested in:
Examples of using Expressed
Show more
Some have already expressed interest in cooperation
Expressed doubts on the utility of the draft
Broad support was expressed for that proposal
Examples of using Db
Show more
Merge another db back to the main one
Place the function switch in the dB position
The value to which dB is attached indicates a gain value
