Examples of 'fader' in a sentence
Meaning of "fader"
fader (noun) - A fader is a component found on audio mixing consoles and DJ equipment that allows the user to fade the volume of a specific audio channel. It is commonly used to smoothly transition between different audio sources or to adjust the overall volume of a track
Show more definitions
- A device used to control sound volume.
- A program or algorithm for fading out colors.
- comparative form of fade: more fade
How to use "fader" in a sentence
Basic
Advanced
fader
The fader start function can be used.
For operating the fader start function.
The fader can now be removed completely.
The light is off when the fader is up.
Replace the fader with the screws.
Fader LEDs illuminate with identical brightness.
Master outputs with separate volume fader.
Both fader rows have an identical function.
This is used for non fader output.
Fader a linear control providing level adjustment.
Check the balance and fader adjustments.
The scene is now memorized on this fader.
Adjust the balance and fader of speakers.
Channel fader for stereo channels.
The effect send way is a pre fader way.
See also
Channel or master fader on mixer or recording device is at zero.
Press this button to lock the pitch fader.
I got a picture of fader with some guy.
Each fader controls a drum sound in each bank.
In this case adjust the fader downward accordingly.
Fader start switch for channel.
Move the channel fader to the maximum level.
The fader start function also operates in reverse.
Move the channel fader away from you.
Configure fader start function if a compatible mixer is connected.
Mixer operations fader start function.
Fader tells me you are an avid boxer.
Using the fader reverse function.
Fader starts his new job next week.
Move the touch fader to the left side.
Step fader is made up of two sequencers designed to facilitate.
Move the channel fader e to the very front.
It can be switched pre or post fader.
To copy the fader customization from to do the following.
Below these are exact fader positions.
Advance the fader of the desired input channel.
The output is not affected by the master fader.
Turn on the fader start function.
You just push this fader.
Set the channel fader to the inner position.
This is what you must do to change a channel fader.
Set the channel fader to the outermost position.
Heard before being affected by the fader.
Channel fader e away from you.
Amount of effect increases when fader is pushed upward.
Raise the fader for the input module.
You can adjust the balance and fader.
Press and together to exit fader assignment customization.
The crossfader integrates the optical fader start switches.
Press and together to enter fader assignment customization.
