Examples of 'fasten the screws' in a sentence
Meaning of "fasten the screws"
A command or instruction to securely tighten or fix screws in place using appropriate tools or methods. It implies the need to ensure that the screws are not loose or easily removable. The phrase is commonly used in construction, carpentry, or any situation that involves assembling or securing objects using screws
How to use "fasten the screws" in a sentence
Basic
Advanced
fasten the screws
Fasten the screws in for a snug fit.
Install this unit and fasten the screws.
Fasten the screws over the connectors.
Choose a secure wall or beam to fasten the screws.
Do not fasten the screws too firmly.
Close battery door and fasten the screws.
Do not fasten the screws too firmly or loosely.
Carefully reposition the cover and fasten the screws.
Then fasten the screws securely.
Close the rear cover and fasten the screws.
Fasten the screws tightly again.
Make sure that you only fasten the screws by hand.
Fasten the screws to make sure the hard drive would not loosen.
Reassemble the housing shells and tightly fasten the screws.
Fasten the screws of the FGUL onto the ULVT system.
See also
Replace the back panel and fasten the screws with a screwdriver.
Adjust the desired inclination of the spotlight and fasten the screws.
Put the grill back on and fasten the screws on both sides again.
Put the sunshield back in its original position and fasten the screws.
Fasten the screws on to the insert with a 13 mm.
Align the engine lengthwise and fasten the screws again tightly.
After the balance issue is remedied, install back the ventilation cover and fasten the screws.
Close the upper cover of the DVR and fasten the screws you loosened in step 1.
Fasten the screws to the wall as shown below . Total screw is 2 pieces.
Place the hard disk into the insertion and fasten the screws.
Before lifting the insert of the pallet, fasten the screws removed from the legs FIG 2.
Put the camera base lid back in its original position and fasten the screws.
Step4, Replace the top cover and fasten the screws you loosened in Step1.
Put the top cover back in its original position and fasten the screws.
Place the Raptor X in the bracket and fasten the screws securely.
Adjust the desired inclination of the spotlight, then tightly fasten the screws again.
Drill the holes, insert the dowels and fasten the screws.
Adjust the desired inclination of the unit, then fasten the screws again.
Supplied with this unit 2 Install this unit and fasten the screws.
Loosen the screws position the door correctly and fasten the screws again FIG 4.
You'll also be interested in:
Examples of using Fasten
Show more
Fasten with the previously removed bolts
You did not fasten it down too well
Fasten any electrode to the welding gun
Examples of using Screws
Show more
The screws are provided in the literature pack
Fully tighten screws with hex wrench
Screws are visible on the burner control panel
