Examples of 'fastening screw' in a sentence
Meaning of "fastening screw"
A fastening screw is a type of threaded metal or plastic device used to hold two or more objects together. It typically has a pointed end that is inserted into a pre-drilled hole, and a flange or head at the other end to provide grip and support. Fastening screws are commonly used in construction, manufacturing, and DIY projects to secure materials or components in place
How to use "fastening screw" in a sentence
Basic
Advanced
fastening screw
Unscrew fastening screw on the worm gear.
Loosen the cutting blade fastening screw.
Loosen the fastening screw shown in illustration.
Pinion with bore and fastening screw.
Three fastening screw for each as shown.
Accessory without fully tightening the fastening screw.
Fastening screw for protective cap.
Then retighten the fastening screw with a wrench.
Fastening screw with rubber pads.
Fasten the cuttercase fastening screw.
Loosen the fastening screw of the tool holder.
Tighten the cover fastening screw.
Fastening screw for handle cover.
Secure the protection grid with the fastening screw.
Grease the fastening screw with copper paste.
See also
Center dovetail in the mount and tighten fastening screw.
Fastening screw for idler shaft.
Lower the cover in line with the fastening screw.
Fastening screw for device hood.
Remove the top cover by unscrewing the fastening screw.
Tighten the fastening screw for the cover.
A template is fastened to the template holder by means of a fastening screw.
The fastening screw is then threaded into a bone.
Then fully tighten the fastening screw on the far right.
Replace the housing and fasten it in place using the fastening screw.
Loosen the fastening screw for height adjustment.
This embodiment uses a wing with a single thread for a fastening screw.
The blade fastening screw has a regular righthanded thread.
To fasten the main tube in the desired position turn the fastening screw clockwise.
Loosen the fastening screw for the back focus ring.
Mount the test tool on the support base using the supplied fastening screw.
Loosen the fastening screw at the back of the device if required.
Remove with a crosspoint screw driver the fastening screw to open the battery compartment.
Tighten the fastening screw on the battery compartment cover in clockwise direction.
Said first body is provided with an elongated hole adapted for receiving a fastening screw.
Screw on the fastening screw in the opposite direction to the arrow.
A locking screw is inserted into a recess in the fastening screw head to cause the expansion.
Reinsert the fastening screw into the bottom of the docking station.
Restore the battery compartment cover into place and turn the fastening screw from.
The screwing of the fastening screw of the wear pad is easier.
A fastening screw is inserted through a bushing located in the through hole of a fixation device.
Jasper does not disclose the fastening screw for use in masonry structures.
The fastening screw fastens the base portion to the housing in two different positions.
Fully open the chuck and unscrew the fastening screw located at its centre caution.
The blade fastening screw must be renewed each time the blade is replaced.
The integral backbone channel completely contains the fastening screw have this reducing total clip profile.
The fastening screw was tightened and the extra membranous material trimmed away with a scalpel.
The radial wall of the head of the fastening screw has a matching tapered inner surface.
Fastening screw for the workpiece support 7.
Remove the slot cover fastening screw with a Philips screwdriver.
You'll also be interested in:
Examples of using Screw
Show more
Tighten the screw through the clips
Screw the two sections of pole together
Remove the screw on the rear coupler
Examples of using Fastening
Show more
Fastening elements for fastening fixing nets
Loosen screws for fastening the appliance
The fastening torque is affected by a wide variety of
