Examples of 'fatigue crack' in a sentence
Meaning of "fatigue crack"
This phrase is often used in engineering or metallurgy to describe a crack or fracture that occurs in a material, such as metal, due to repeated stress or fatigue. It signifies a particular type of crack that is caused by cyclic loading or strain
How to use "fatigue crack" in a sentence
Basic
Advanced
fatigue crack
Direction of fatigue crack propagation identified by arrows.
An incremental model is proposed for fatigue crack growth.
Fatigue crack length was continuously monitored by a compliance technique.
In most cases a fatigue crack is not a defect.
Fatigue crack growth theory.
Residual stresses and fatigue crack propagation.
Fatigue crack propagation data as a function of frequency of stressing in seawater.
The accident was caused by a fatigue crack in a wing spar.
Fatigue crack growth is analysed within the framework of fracture mechanics.
Method and system for probabilistic fatigue crack life estimation.
Fatigue crack zone.
Investigators determined the fatigue crack would likely have been detected during an overhaul.
Fatigue crack growth was attributed to a combination of high and normal loads.
A relatively coarse grain size is associated with good fatigue crack growth resistance.
Fatigue crack is one of main problems in mechanical components and metallic structures.
See also
Furthermore a metal substrate is to be provided that has a reduced fatigue crack propagation rate.
The results show that fatigue crack growth can be of significant importance.
These phases contribute to the lowering of fracture toughness and resistance to fatigue crack growth.
Fatigue crack growth will be possible on the tension side of the bar.
Routine inspections did not detect the fatigue crack which would have been clearly visible.
Fatigue crack propagations have been implemented and some practical simulations have been considered.
His work is also used for modeling of fatigue crack growth under aircraft spectrum loading.
Metallurgical examination of the recovered titanium fan hub fragment identified a subsurface fatigue crack origin.
Tenders rules by which fatigue crack growth and ductile tearing could be predicted.
A lower crack growth rate at a given applied AK indicates greater resistance to fatigue crack propagation.
Method of forming fatigue crack resistant nickel base superalloys and products formed.
The fracture surfaces were studied with a SEM to locate the site of fatigue crack nucleation.
The location of fatigue crack nucleation usually takes place at points of high stress intensity.
There was no evidence of in-service fatigue crack growth.
Fracture toughness and fatigue crack growth at non-creep temperatures.
Further, an effect of delaying the propagation of a fatigue crack is lost.
Use of the Kurtosis to detect a fatigue crack in a gearbox has been successfully demonstrated.
Lastly, two laws were proposed to predict the propagation life of fatigue crack.
Finally, simulated fatigue crack propagation rates in hydrogen are compared to experimental measurements.
Sound, electric or optical probes for determining the appearance of a fatigue crack.
Moreover, mechanisms of fatigue crack growth were identified during scanning electron microscopy experiments.
The other cross-sectional area consists of the fatigue crack or cracks region.
Fatigue crack growth rate qualifying criteria of rails for railways, test conditions to be optimized ;.
Finally, they characterised damage tolerance and fatigue crack growth for the various welds.
Moreover, fatigue crack initiation is less studied for adhesives than the fatigue crack propagation.
Investigation indicated that the metal fatigue crack must have spread rapidly in less than 4 hours.
Fatigue crack b Vue du faciès de rupture, b View of fracture surface.
That is, a decrease in Fe and Si increases toughness and resistance to fatigue crack growth.
Abstract, The short fatigue crack propagation in polycrystal materials depends strongly on microstructure.
The ATSB was unable to determine, conclusively, what caused the fatigue crack to occur.
Finally, scaling effects and fretting fatigue crack propagation kinetics are studied in Chapter 6.
The fatigue crack growth test results are provided in Fig . 5.
However microstructure relationships with their fatigue crack growth resistance ( FCGR ) need still to be clarified.
Fatigue crack growth of Incoloy 908 at high temperature.
Fracture face A with beach marks in the fatigue crack region Photo 3.
You'll also be interested in:
Examples of using Crack
Show more
So let us crack open your piggy bank
I have to be back here at the crack of dawn
I will take a crack behind the wheel
Examples of using Fatigue
Show more
Fatigue was not considered a factor in this occurrence
Any perception of reform fatigue needs to be countered
No fatigue duty for the top ten
