Examples of 'fatigue cracks' in a sentence
Meaning of "fatigue cracks"
fatigue cracks: Small fissures or fractures that develop in a material due to repeated stress or strain, often found in metals or structures
How to use "fatigue cracks" in a sentence
Basic
Advanced
fatigue cracks
This can enable fatigue cracks to be detected.
Fatigue cracks frequently initiate at such fastener holes.
The presence of superficial irregularities favour the nucleation of fatigue cracks.
Numerical analysis of fatigue cracks in combat aircraft metallic structures.
The rail must be able to resist the propagation of fatigue cracks.
No fatigue cracks were observed elsewhere.
Passing the test meant that there were no large fatigue cracks present.
Locating fatigue cracks is paramount to flight safety of the aircraft.
This serves to reveal the formation of fatigue cracks in the pressure surfaces.
It had fatigue cracks and would have failed at some point.
These wear damages may initiate fatigue cracks causing fracture of the bolt.
The fatigue cracks are started by focal points of oxide particles and stringers of impurities.
These phenomena can give rise to fatigue cracks and lead to premature breakage of parts.
Fatigue cracks about the fastener holes develop in response to stress of the aircraft structures.
Deterioration processes such as fatigue cracks and corrosion can always be present to some degree.
See also
These geometric discontinuities are thus the main locations for the initiation of fatigue cracks.
Behaviour of short fatigue cracks in austenitic stainless steels literature review.
Each joint bar image is then automatically saved and analyzed for visible fatigue cracks.
This leads to fatigue cracks causing early failure of the rail system.
A asphalt binder modified by polymer usually exhibits more resistance to thermal deformation and fatigue cracks.
The fretting initiates fatigue cracks which then grow under cyclical loading until failure occurs.
As a result, the generation of fatigue cracks is induced.
Behaviour of short fatigue cracks in austenitic stainless steels Part I Literature review.
The non-metallic inclusions in the steel are fatigue cracks.
MED is the simultaneous presence of fatigue cracks in similar adjacent structural elements.
Fatigue cracks always start at stress raisers, so removing such defects increases the fatigue strength.
EDM can also induce vertical fatigue cracks in the melted and resolidified top layer.
Caused by cyclic stress on the fuselage. These lines you see here are fatigue cracks.
Typically, fatigue cracks take time to develop.
Method of determining the non-propagation threshold of fatigue cracks at high frequency.
However, the fatigue cracks did not begin at the intersection of the welds.
That there were no pre-existing defects or fatigue cracks on the fracture surfaces.
After the accident 49 recovered bolts were investigated, of which 41 had fatigue cracks.
This can result in fretting fatigue, whereby fatigue cracks can initiate in the fretting zone.
Areas of the fuselage structure, are particularly susceptible to corrosion and fatigue cracks ( shaded ).
In 1977, fatigue cracks were discovered in the wings of the British Airways Trident fleet.
Right: Curls within the fusion zone and fatigue cracks are visible.
Embedded fatigue cracks on rail specimen TSB-1 Photo 7.
All of the recovered16 studs of the No. 2 cylinder had failed due to fatigue cracks.
You'll also be interested in:
Examples of using Cracks
Show more
Slight cracks or fissures due to handling or washing
Filling holes and cracks before painting
Cracks started to appear around the walls
Examples of using Fatigue
Show more
Fatigue was not considered a factor in this occurrence
Any perception of reform fatigue needs to be countered
No fatigue duty for the top ten
