Examples of 'fatigue damage' in a sentence
Meaning of "fatigue damage"
Fatigue damage refers to the weakening or deterioration of a material or structure due to repeated stress or loading over time. In engineering, it is a common phenomenon that can lead to cracks, fractures, or failure of components
How to use "fatigue damage" in a sentence
Basic
Advanced
fatigue damage
A new anisotropic fatigue damage model is developed.
It is therefore far less prone to fatigue damage.
This causes fatigue damage to the material.
This is the phenomenon of fatigue damage.
The resulting fatigue damage is hereby significantly reduced.
The second is the numerical simulation of the phenomenon of fatigue damage.
The effect of resonance to fatigue damage in azimuth thruster.
Fatigue damage is more insidious.
Cumulative fatigue damage.
Fatigue damage is a symptom of the frame being worn out through use.
A critical point is to verify which environmental condition contributes more to fatigue damage.
This fatigue damage could be compensated during other periods of operation.
Demonstrate the safety of a structure that may be susceptible to widespread fatigue damage.
The fatigue damage is caused by fatigue failure as the fatigue process proceeds.
All sources of cyclic loading that can cause fatigue damage shall be identified.
See also
Also fatigue damage is likely to become more common with the heavier loads.
An important issue in design of wind turbine blades is the resistance towards fatigue damage.
These phenomena can be a significant source of fatigue damage and undermine the structures serviceability.
The developed model is a degrading hysteretic model based on the low cycle fatigue damage index.
This avoidance will minimize the potential for fatigue damage accumulation in the rotor assemblies.
Monitoring fatigue damage accumulation in planetary gears using Barkhausen noise.
A controlled flaw manufacturing method based on the thermal fatigue damage mechanism was developed.
As a result, the fatigue damage resistance is significantly increased.
Once those resources are expended you will start taking fatigue damage for each subsequent draw.
As a result, the fatigue damage resistance can further be improved.
The second is considered with the fatigue damage spectrum FDS.
As a result, the fatigue damage resistance of the rail is reduced.
Testing followed on a bridge in Sweden with hangers that were susceptible to fatigue damage.
As a result, the fatigue damage resistance of the rail is degraded.
The cohesive zone law is re-formulated to include fatigue damage.
Fatigue damage assessment of naval structures, proposal for a new method.
In other examples of the invention, different fatigue damage sensors can be used.
Optionally, the fatigue damage sensor is mounted in a recess on the body.
One significant environmental variable is vibration, which poses risk for especially fatigue damage.
At the same time, fatigue damage occurs due to coarse precipitates.
Furthermore, the vibrations arising if the blade stalls also increase the fatigue damage.
Optionally, the fatigue damage sensor is connected to an inner surface of the recess.
Accordingly, it becomes possible to improve the fatigue damage resistance of the pearlite rail.
For the current fatigue damage study, only dry as molded material has been analyzed.
As a result, it becomes possible to improve the fatigue damage resistance of the pearlite rail.
Moreover, fatigue damage requires a significantly smaller maximum load than with static damage.
Therefore, it becomes possible to further improve the fatigue damage resistance of the pearlite rail.
Optionally, the fatigue damage sensor is integrated into a body of the marine riser component.
The control and / or monitoring application is a fatigue damage estimator based on long term loads.
For example, any curved drill pipe is often a potential factor for fatigue damage.
The accumulated fatigue damage 1s calculated taking into account:.
This way, the vibrations can be reduced, thereby lowering the fatigue damage.
FIG . 9 shows a fatigue damage indicator incorporated in a hoisting ring ;.
Thereby, toughness of a rail is degraded, and simultaneously, fatigue damage occurs due to coarse precipitates.
In fatigue damage calculation the Palmgren-Miner rule is used with S-N curves.
You'll also be interested in:
Examples of using Damage
Show more
There is no water damage or fire extinguisher residue
Damage to persons and property is generally compensable
This prevents damage and abnormal vibrations
Examples of using Fatigue
Show more
Fatigue was not considered a factor in this occurrence
Any perception of reform fatigue needs to be countered
No fatigue duty for the top ten
