Examples of 'fatigue tests' in a sentence
Meaning of "fatigue tests"
fatigue tests: Refers to a series of experiments or assessments conducted to evaluate the endurance, strength, or structural integrity of a material, component, or system under repeated or fluctuating loads. These tests are designed to simulate and measure the fatigue life and behavior of the subject
How to use "fatigue tests" in a sentence
Basic
Advanced
fatigue tests
The fatigue tests were conducted using a shaker.
Results are discussed with respect to experimental fatigue tests.
The fatigue tests were performed in load control.
Fatigue behavior was studied by analyzing fatigue tests results.
Mechanical fatigue tests were carried out.
The numerical results are compared to those of experimental bending fatigue tests.
Fatigue tests were performed on three different types of material.
Full scale fatigue tests.
Fatigue tests available in the literature were considered to assess the methodology.
The model is applied to experimental fatigue tests of pcbs available on literature.
Fatigue tests are finally performed on a lug with shrink fitted rings.
Thinking about the design of fatigue tests applied to components or structures.
Fatigue tests of metals.
A relatively small number of fatigue tests have however been performed in seawater.
Fatigue tests results.
See also
Dynamic tests are used to investigate specifics values or for fatigue tests.
Fatigue tests under constants amplitudes loading highlight three stages of damage.
There are adrenal fatigue tests you can get from your doctor.
Fatigue tests under simple bending were carried out on three corrugated hoses.
The padding thus lasts considerably longer when subjected to fatigue tests.
Fatigue tests have in fact shown that parts breakages no longer occur.
This is observed from tensile and fatigue tests as an important increase in mechanical properties.
Experimental results and simulations of transverse crack growth during fatigue tests are presented.
Gear fatigue tests are an essential part of the development of power transmission devices.
The dynamic load is used for fatigue tests and service life analysis.
This work shows an experimental technique drived by computer for thermomechanical fatigue tests.
The programme covered extensive fatigue tests onwelded joints typical of tubular connections.
Fatigue test samples were taken from each casting and fatigue tests were performed.
Resistance to thermal fatigue tests were also carried out with a specific arrangement described below.
An equivalent replacement part is subject to the structural strength and thermal fatigue tests only.
Rotating bending fatigue tests are carried out with the test pieces shown below.
Sulky tests the quality of its equipment under extreme conditions during fatigue tests.
Three fatigue tests are run to failure, as described above.
The method of the invention therefore consists in carrying out cyclic fatigue tests on specimens.
The results of the thermal fatigue tests are presented in table 3 below.
There was also a significant difference related to the use static and dynamic cyclic fatigue tests.
The way of the bending fatigue tests are as follows,.
NSK has developed new alloys that yield better results during rolling contact fatigue tests.
In this work, fatigue tests on pressure vessels with surface defects were presented.
Composite repair of fatigue cracked aluminium aircraft structures - design of fatigue tests.
Static and dynamic cyclic fatigue tests were performed using a custom-made device.
Fatigue tests are an essential element in the development of durable, safe, and reliable implants.
Compression, tension test and fatigue tests were use for evaluated the mechanical properties.
Fatigue tests should be considered in material characterization even if a high-cost and time are required.
However, the results of the thesis should be validated with full-scale fatigue tests.
Fatigue tests are performed in order to gauge the long-term durability of the finished product.
This was determined by strain-controlled fatigue tests of thin HFMI-treated steel sheet specimens.
Fatigue tests are used to determine the behavior of an elastomer component under a long-term loading.
The instruments were initially subjected to a cantilever-bending test, then to static and dynamic fatigue tests.
Thirty-two strut specimens were studied in bending fatigue tests within four different test series.
You'll also be interested in:
Examples of using Tests
Show more
These tests are now not thought to be necessary
Your cooperation in these tests is greatly appreciated
God tests our faith in many ways
Examples of using Fatigue
Show more
Fatigue was not considered a factor in this occurrence
Any perception of reform fatigue needs to be countered
No fatigue duty for the top ten
