Examples of 'fault current' in a sentence
Meaning of "fault current"
fault current: Refers to an unintended current flow in an electrical system due to a fault or defect
How to use "fault current" in a sentence
Basic
Advanced
fault current
Thus the fault current is primarily limited.
Prevent an increase in the fault current levels.
Thus the fault current is finally limited.
Connect the machine using a fault current protection.
Fault current in the first instant of the fault.
Extinction of earth fault current by compensation.
A fault current is detected on the superconducting electric cable.
Extinction of ground fault current by compensation.
Superconducting elements are not stressed by the fault current.
Discloses a fault current limiter using permanent magnets.
This is the function of arc fault current detectors.
Fault current detecting circuit.
This will reduce the fault current to zero.
Fault current of an electrode.
With regard to the fast fault current injection simulation.
See also
As additional protection we recommend the installation of a fault current protection.
With low resistance fault current limit is relatively high.
This could damage the sensor or lead to fault current.
Hybrid fault current limiter.
The earth is not to be considered an effective fault current path.
A directional fault current is being detected.
But not all positive sequence current is fault current.
Fast fault current.
The signal thus obtained is called false earth fault current.
It solves the problem of a fault current produced as a result of a short circuit.
Fault current is displayed.
Detailed operations of the hybrid fault current limiter are as follows.
The first fault current detection circuit is dependent on a grid voltage.
This is typically the case for fault current conditions.
High voltage fault current limiter having immersed phase coils.
Second intended object is a rapid detection of an excessively intense fault current.
This may cause the fault current limiter not to operate.
Positive sequence current consists of load current plus fault current.
Since the fault current does not pass through them.
This signal may be the tripping of a fault current protection device.
Due to the fault current restriction it is more safe for gassy mines.
Each sfcl device was tested under three different fault current levels.
Fault current enhancement for energy resources with power electronic interface.
Another problem is that the fault current can have several sources.
Any fault current occurring can return to the source in a controlled manner.
Lower footprint for a given fault current and steady state rating.
Impedance should not be too low for desired maximum fault current.
It is important practically for a fault current limiter to have a low insertion impedance.
The semiconductor cutoff module is thus arranged to interrupt the fault current.
The second fault current detection circuit is independent of the grid voltage.
The absence of said frangible window constitutes means for indicating a fault current.
Carry out fault current calculations in order to choose equipment relating to electric supply.
A known solution for a current limiter is in the form of a magnetic fault current limiter.
A fault current is initially drained via the contact resistances of the earth electrode.
The type of fault can be ascertained by noting which phases have fault current.
You'll also be interested in:
Examples of using Current
Show more
The current national legislation on adoptions states
To temporarily alter the current programmed temperature
Current prosecutions of the crime of abduction of minors
Examples of using Fault
Show more
Have the fault corrected in an approved workshop
Separate sensor from harness to determine fault
Have the fault rectified by a specialist workshop
