Examples of 'fill hole' in a sentence
Meaning of "fill hole"
fill hole ~ an expression commonly used when referring to the act of replacing something that is missing, lacking, or empty, often used metaphorically to indicate a need or void that needs to be addressed or fulfilled
How to use "fill hole" in a sentence
Basic
Advanced
fill hole
Oil fill hole but do not screw in.
Must have put it in the fill hole.
Fill hole completely with concrete.
Add oil to top of fill hole in base.
Fill hole with water to a third of the depth.
Engine lubricant through oil fill hole.
We are gonna plug that fill hole and beat this thing down.
The lubricant level should be at bottom edge of the oil fill hole.
Slowly pour oil into oil fill hole using funnel.
Always check the oil level visible and to edge of fill hole.
Pour the oil out of the oil fill hole and into a container by.
Pour the entire bottle of oil into the oil fill hole.
Remove cap and gasket covering fill hole during shipping not shown.
The fill hole is preferably sealed by welding a cover or cap over the fill hole.
Refill through oil fill hole.
See also
Add oil to the oil fill hole until the oil level is approximately.
Comes shipped with cap and gasket covering fill hole during shipping.
Seals off engine oil fill hole and provides indicator for engine oil level.
Do not look directly down into fill hole when filling.
Open the Water Fill Hole Cover by gripping side tabs and gently pulling out.
Pour the oil out of the oil fill hole and into a.
Using funnel provided, add entire bottle of engine lubricant through oil fill hole.
Insert oil fill dipstick into oil fill hole but do not screw in.
Crankcase pressure can cause hot engine oil to spray out of engine fill hole.
A filling tube can be coupled to the fill hole and sealed after filling.
Turn the jack over so that old oil will drain from the oil fill hole.
Wipe dipstick clean, insert it into oil fill hole and tighten securely, remove dipstick.
Carefully pour water from Measuring Cup into Boiler through fill hole.
If I just tried to do a normal flat fill hole command, it will not work.
If needed, slowly add oil until it reaches the top of fill hole.
Insert oil fill dipstick into oil fill hole but do not screw in Figure 23.
The quartz fill is then impregnated with a binder solution through fill hole 42.
Insert oil fill cap into oil fill hole but do not screw in Figure 25.
Place the fuel container spout into the fuel tank fill hole and fill.
A threaded plug 43 will seal the fill hole after filling of damper 1 with an ER fluid.
Wipe dipstick clean, insert it into oil fill hole and.
Oil into the oil fill hole until " Full " on the fill cap / dipstick line.
Select them and use the Fill Hole option.
Fill hole approximately 1/3 full with mixed concrete.
Place the gas container 's spout into the fill hole on the fuel tank.
Preferably, a filler material, such as powdered bone or tooth material is used to fill hole 602.
To refill, slowly pour gear lube into the oil fill hole see Specifications section.
Figure 1 shows a mammary implant 5 having a completely texturized outer surface 7, a patch 9 and a fill hole 8.
Place the gas container 's spout into the fill hole on the fuel tank Fig . 6.
Tanks for transport of dangerous goods - Service equipment - Fill hole cover.
On the bottom 4a of the container 4 is provided a fill hole 4b for the propellant.
Tanks for transport of dangerous goods - Fill hole cover.
Hence, the hole 124 functions as both a fill hole and a vent hole.
Fill to the overflow point in the oil fill hole J1.
Pour the entire bottle of oil into the oil fill hole Fig . 9.
