Examples of 'mm hole' in a sentence
Meaning of "mm hole"
mm hole ~ 'mm hole' refers to a hole with a diameter or size measured in millimeters. It describes a circular opening or void that has a specific dimension in millimeters. The measurement in millimeters indicates the exact size of the hole, whether it's in a physical object or a technical drawing or specification
How to use "mm hole" in a sentence
Basic
Advanced
mm hole
Mm hole for plumbing can be located anywhere within shaded area.
A specially manufactured trephine is used to create a 8 mm hole in the skull bilaterally.
A small I mm hole was made in the shell.
The two holes are close to each other and diametrically opposed to the 30 mm hole.
Mm Hole in floor.
It is housed in the 52 mm hole in an aluminium filler element.
The look-up table is based on a standard 4 mm hole in the mask.
Drill a 3 mm hole through the small balsa block.
Charge the resin through the 30 mm hole in the lid.
Drill a 6 mm hole and simply insert the dowel by hand.
Puncture strength with a 2 mm radius tipped probe through a tented 6 mm hole.
Drill a 4 mm hole through the clamp into the concrete and knock in.
The distal end of the reservoir consists of a 4mm long 3 mm hole.
Drill an 8 mm hole and place the LED in it.
It may be used as a small bird nest box, using the 32 mm hole protector.
See also
Drill a Ø 3 mm hole in the cabinet panel to avoid splitting the wood.
Install the coupling bar with the trim grille, passing it through the 68 mm hole.
Drill a 70 mm hole near the outlet on the left.
The jars were sealed with a screw-type metal lid, in which a 5 mm hole had been drilled.
Execute a 68 mm hole for the coupling pipe in the wall.
Interior of the vehicle Drill a 14 mm hole into the vehicle body.
Drill a 20 mm hole in your dashboard glove compartment or parcel tray.
The example illustrated in Fig . 9 is for a patient having reamed a 64 mm hole in acetabulum.
Drill a 10 mm hole in the section you want to saw out.
Furniture handle holes and 32 mm hole rows.
A 6 mm hole is drilled in the center.
Rubber packing for lid with a 12 mm hole.
Execute a 68 mm hole for the coupling bar in the suspended ceiling.
The reference sample 2 pulled from the 1.4 mm hole broke during pullout.
Drill a 12 mm hole at the centre of this disk, to help with centring.
It will have, making movements back and forth, expanding by 0.1 mm hole in the wheel.
Drill a 2 mm hole with a spherical diamond bit, mounted on a high-speed drill.
Plastic lid for air lock and rubber packing with a 12 mm hole and 82 mm diameter.
A 2 - 3 mm hole was made in the caecum of each of tested animal using a biopsy punch.
Then drill a Ø 83 mm hole through the outer wall.
A 4 mm hole was placed in the 0.5 mm thick spatulate end of this extension.
Small Birch log Bird Nest 35 mm Hole is suitable for the following bird species:.
M6 bolt on a metal rail Recommendation, ring lug with a 6 mm hole.
When using a blade with 25 mm hole diameter, install this ring between flanges.
Drill a 14 mm hole into the vehicle body . Insert the O-ring rubber grommet into the vehicle body.
Large Birch log Bird Nest Box 45 mm Hole is suitable for the following bird species:.
Drill 7 mm holes for the attachment screws and one 9.5 mm hole for the square.
When using a blade with 25 mm hole diameter, replace the silver ring with the black ring.
Drill a 14 mm hole into the vehicle body . Insert the O-ring rubber.
Drill a 14 mm hole into the vehicle body.
Drill a ø12 mm hole near the centre of the.
Drill a Ø 160 mm hole at the point where the chimney.
Blade diameter 305 mm Hole diameter European countries.
You'll also be interested in:
Examples of using Mm
Show more
Mm vinyl coated steel retracting security cable
Is the nominal diameter of the rim expressed in mm
Mm small brush with black polyester bristles
Examples of using Hole
Show more
So does that giant hole in the wall there
The hole of the steam spout is clogged
Cut the piping hole sloped slightly
