Examples of 'film strength' in a sentence
Meaning of "film strength"
film strength: a term commonly used in the context of lubricants to describe the ability of a lubricating film to withstand pressure and prevent metal-to-metal contact
How to use "film strength" in a sentence
Basic
Advanced
film strength
A sufficient film strength is hence difficult to obtain.
The polyurethane controls the alloy film strength.
The wet film strength was decreased.
Gelatin hard capsule having enhanced film strength.
This film strength is further enhanced by the antiwear additive protection.
Silicon oxide is necessary for maintaining the film strength.
Film strength is greatest when the quaternary ammonium compounds are used.
But these agents tend to degrade film strength and clarity.
Lubricating qualities and film strength can be improved by the addition of certain chemical agents.
It is considered the most important property of a lubricant because it indicates film strength.
They provide a high film strength coating on gear teeth to minimize wear.
Such downgauging is often done at the expense of film strength and abuse resistance.
The film strength was evaluated in terms of Mohs hardness.
The lubricant then possesses film strength and boundary lubrication properties.
Fast circulation during cold weather and excellent film strength when hot.
See also
Film strength and flexibility Two films were applied to a silicone rubber sheet.
The coating film is preferably further heated or baked in view of the film strength.
Film Strength Property of a lubricant that acts to prevent scuffing or scoring of metal parts.
Films prepared from the resin have good mechanical properties such as film strength.
The wet film strength was improved from 1a.
The binder is used not only for dispersion but also for improvement of film strength.
The wet film strength was decrease from 1a.
The aqueous composition may further include a plasticizer to improve the film strength of the capsule.
Thus, the film strength can be further improved.
A too thin double film layer is not practical because the film strength becomes too low.
The wet film strength was slight higher than that of 1a.
The use of the crosslinking agent can improve the film strength and the water resistance.
The film strength was calculated by integrating the área underneath the stress-strain curves.
LLDPE is preferred due to its known superior film strength properties.
In addition, it degrades the film strength and increases the rubbing wear of the film.
These methods, however, have disadvantages in the formation of ion complexes or film strength.
As a lubricant, it has unparalleled film strength both hot and cold.
Oil compressibility, film strength failure and microdieseling can damage equipment components and affect performance.
Chevron Form Oil contains an oiliness additive that maximizes film strength under boundary lubrication.
Film strength after 1 week.
The finished viscosity and wet film strength were slightly decreased from 1a.
The core or structural layer can be varied to meet application-specific film strength requirements.
Film strength after 1 day.
If the proportion of hexafluoropropylene is higher, the film strength may possibly be insufficient.
High viscosity index - Minimal viscosity change in broad operating temperature range enhances lubricant film strength.
Its low co-efficient of friction and high film strength help dramatically reduce heat and wear.
In oil-based lubricants addition of TBP increases the oil film strength.
Film strength is greatly improved in COC formulations containing 25 % or less of the COC elastomer.
The solution viscosity was slightly increased and the wet film strength was improved from 1a.
Minimum leakage - Contains an oiliness additive to help minimize leakage and maximize film strength.
Recently, however, higher transparency and film strength have been demanded.
The film could easily be cut in CD, sealed well and showed a good film strength.
The lubricant is preferably water-soluble, having high film strength and rust-inhibiting properties.
On the contrary, when the thickness is too great, the film strength lowers.
On the contrary, when the content exceeds 70 wt %, the film strength inconveniently lowers.
You'll also be interested in:
Examples of using Film
Show more
The film has not started yet
We are finishing the film about that invention
Film can be applied without disconnecting pump
Examples of using Strength
Show more
Your inner strength should be even stronger
That can only be achieved through strength
We ask for strength to surpass all understanding
