Examples of 'fracture strength' in a sentence
Meaning of "fracture strength"
fracture strength: This phrase is typically used in the context of materials science or engineering to describe the maximum stress or load that a material can withstand before breaking or fracturing
How to use "fracture strength" in a sentence
Basic
Advanced
fracture strength
The fracture strength of the pellets was then measured in psi.
Garnetiferous quartzites bear a higher fracture strength than garnet sillimanite gneisses.
Fracture strength or breaking strength is the stress when a specimen fails or fractures.
The elastic constants and fracture strength of thermally sprayed NiCr coating.
The heat treatment should be sufficient to increase the green fracture strength of the part.
The minimum bend fracture strength test results are not characteristics of the practice.
This assists with the control of the fracture strength of the first seal.
For test fracture strength a polyether impression material was used to simulate the periodontal ligament.
This tests enables a dynamic evaluation of the fracture strength and friability of the grains.
The fracture strength and the fracture elongation can be measured without particular limitation.
In thin films ultraviolet light may be sufficient to achieve the required green fracture strength.
KIC is the fracture strength or toughness and GIC is the fracture energy.
When the finished surface roughness is decreased higher fatigue fracture strength can be obtained.
In addition, fracture strength versus temperature for a conventional alloy is shown.
The tube will crack if this stress exceeds the tensile fracture strength of the material.
See also
Calculate the average fracture strength by using the following equation, EPMATHMARKEREP where.
Such physical and chemical characteristics are defined by the Volume Weighted Fracture Strength.
A process for increasing the green fracture strength of a ceramic part, characterised by,.
Uncontrolled structural unhomogeneity reduces, above all, the fracture strength.
A fracture strength curve shown in Fig . 9 can be obtained from the results of the test.
As a result, the result was the delayed fracture strength was inferior.
Fracture strength and fracture elongation were calculated from the following formulas, EPMATHMARKEREP EPMATHMARKEREP.
Accordingly, cracking is prevented and the shear fracture strength is increased.
The fracture strength is, more preferably, at least 3 MPa.
Furthermore, the resulting materials demonstrated improved fracture strength and compression.
Figure 3, the relation between fracture strength and pressure force in an isomalt-based tablet.
When the amount of carbon black is too small, fracture strength decreases.
Fracture Strength a . Place 1 gram of particles in 1 liter of distilled deionized ( DI ) water.
Thus, there is a need for a diamond crystal with increased compressive fracture strength.
A deterioration in tensile fracture strength is observed at less than 0.9 times.
Also, twisted fibers have a spin pitch which is limited by the fiber 's fracture strength.
Such particles have a Volume Weighted Fracture Strength from 2 MPa to 5 MPa.
The prior art stoichiometric LSM-interconnects exhibit low values for dynamic Young 's modulus and fracture strength.
When the amount exceeds 200 parts by weight, fracture strength tends to deteriorate.
The strength of the tablets was assessed by measuring the diametral fracture strength ( DFS ).
The device of claim 51, wherein said substrate material has a fracture strength of at least 100 Mpa.
Figure 5 shows the effect of Cu on the joint fracture strength.
You'll also be interested in:
Examples of using Fracture
Show more
A little fracture below the brain area
Looks like a hip and femur fracture
Posterior cranial fracture and subdural hematoma
Examples of using Strength
Show more
Your inner strength should be even stronger
That can only be achieved through strength
We ask for strength to surpass all understanding
