Examples of 'fixing screw' in a sentence
Meaning of "fixing screw"
A fixing screw is a type of fastener used to secure or attach objects together. It typically has a threaded shaft and a head that allows for easy tightening or loosening using a tool such as a screwdriver or wrench
How to use "fixing screw" in a sentence
Basic
Advanced
fixing screw
Fixing screw stud on the back piece.
Then tighten the fixing screw again.
Fixing screw sizes and tightening torques.
Tighten the needle clamp fixing screw.
Fixing screw for base part of clamp.
Drill the fixing screw holes.
Fixing screw made of electrically insulating material.
Ensure that the fixing screw is correctly seated.
Fixing screw positions are located as follows.
Parallel guide fixing screw location.
Fixing screw of the front face on its frame.
Reattach the insulation fixing screw on the right as it was.
Fixing screw for protection net.
After loosing its fixing screw.
A single fixing screw is required to perform adjustment.
See also
Lock the dome by using the fixing screw.
Remove fixing screw to open the service panel.
Indoor unit cover fixing screw.
Remove the fixing screw and cover assembly.
Attach the clamper using the fixing screw.
Tighten the fixing screw to secure the dome.
Properly tighten the seat height fixing screw again.
Undo the fixing screw located on the longitudinal.
Replace the table insert and its fixing screw.
Tighten the fixing screw again when finished.
Then fix the cable using the fixing screw.
Special fixing screw to hold the hopper in place.
The elongate openings serve for insertion of a fixing screw.
Blade fixing screw are securely fastened.
The drawing also shows an analog and a fixing screw.
Remove the fixing screw that secures the camera to.
Position the clamp and tighten the fixing screw securely.
Fixing screw for remote controller holder field supply.
Tighten the right fixing screw of the pulley locking device.
Fixing screw of the camera.
Be careful that the fixing screw of your head is made of plastic.
Fixing screw joint.
The platforms comprise a fixing screw or bolt on their outer face.
Fixing screw insulator.
Measure glass thickness and determine length of fixing screw required.
Loosen the fixing screw beneath the arm cushion.
Another option is to locate it in the receiving orifice of the fixing screw.
The blade fixing screw has a standard righthand thread.
There may also be a sealing washer under the fixing screw.
Loosen the fixing screw by turning in the running direction.
Attach the battery cover and secure it using the fixing screw.
Replace the fixing screw at the front of the light cover.
Remove the handle from the base by unscrewing the fixing screw.
Screw the fixing screw into the top of the connector.
Lift the plate away and carefully store it and its fixing screw.
