Examples of 'flame temperature' in a sentence
Meaning of "flame temperature"
Flame temperature: This phrase refers to the degree of heat produced by a flame. It is often used in scientific contexts, such as chemistry or physics, to describe the intensity or level of heat generated by a burning fire or combustion process
How to use "flame temperature" in a sentence
Basic
Advanced
flame temperature
Flame temperature sensor defective or not connected.
Reading will vary with flame temperature.
We calculate flame temperature and burn patterns.
The resulting flame has a lower flame temperature.
Flame temperature did not significantly affect viability.
Cleaning the flame temperature sensor.
Flame temperature and calculation of combustion products content.
The resulting flame has a higher flame temperature.
A lower flame temperature is equal to less NOx.
Various techniques are known for determining the flame temperature.
Clean flame temperature probe and acknowledge error message.
The supply air is relatively cool as compared to flame temperature.
Its flame temperature is high.
Accordingly provisions for regulating said flame temperature should be made.
The flame temperature is not high in its natural state.
See also
This property substantially reduces the flame temperature of the present compositions.
The flame temperature sensor can be pulled out of the cast cover.
It is well known that NOx emissions can be reduced by lowering flame temperature.
A reduced flame temperature will reduce the NOx formation.
When changing from air combustion to oxycombustion the flame temperature becomes higher.
The adiabatic flame temperature is determined from the chemiluminescence radiation.
The main control strategy to reduce thermal NOx is to reduce peak flame temperature.
The maximum flame temperature is predetermined for different oxygen purity levels.
A large amount of steam is necessary to reduce flame temperature and obtain a required NOx reduction.
The flame temperature is important to ensure the compounds are broken down into atoms.
The gas supplied to the burner has a flame temperature equivalent to that of natural gas.
Apply the energy balance to a combustion and look for the adiabatic flame temperature.
This reduction in flame temperature is required in order to significantly reduce NOx emissions.
Open the wing nut and pull back the flame temperature sensor holder.
Bottom flame temperature sensor defective or not connected Correction.
Dilution of the necessary oxygen in a very large mass of gas lowers the flame temperature.
This results in the reduction of the flame temperature and therefore a further decrease of NOx.
The aim of this thesis was to study how gas burner design affects flame temperature.
The key factors in NOx formation are flame temperature and oxygen levels present for combustion.
The dilution of the combustion reactants with flue gas will reduce the maximum flame temperature.
The additional thermal load will decrease the flame temperature and thus reduce thermal NOx formation.
This application has one or more water injectors outside the burner that reduce flame temperature.
It does not oxidize under the high flame temperature of a Bunsen burner.
Cleaning the flame temperature sensor Remove the dust deposits from the sensor at regular intervals.
Pyrometry theory was subsequently used to calculate sooting flame temperature and the soot KL factor.
Reducing the flame temperature in the burners ;.
Oxy-fuel combustion system with closed loop flame temperature control.
For example, the flame temperature may be calculated.
Further, prior art devices, controlled pollutants by limiting the flame temperature.
In addition, the flame temperature is lower.
Such pyrotechnics 16 absorb infrared laser light easily and have a particularly high flame temperature.
In other words, the flame temperature needs to be moderated.
Note, regular use could cause discolouring around the burners, because of the high flame temperature.
Thus, the flame temperature drops in the second combustion zone.
The NOX-formation is correlated to the flame temperature in this turbine.
You'll also be interested in:
Examples of using Temperature
Show more
Manufacturer of the separate temperature measuring equipment
Actual temperature below low temperature value
Select the desired temperature with and
Examples of using Flame
Show more
Flame retardant materials bear the mark
Envision the flame burning within you
Flame disk or combustion heads dirty or worn
