Examples of 'flame test' in a sentence
Meaning of "flame test"
A qualitative analytical technique used in chemistry to identify certain elements present in a substance by observing the color of the flame produced when the substance is heated. Different elements produce distinct colors, allowing for the identification and characterization of elements
Show more definitions
- in qualitative inorganic analysis, a simple test for the presence of a range of metallic elements based on the colour imparted to a flame by a sample
How to use "flame test" in a sentence
Basic
Advanced
flame test
The flame test carried out on a copper halide.
Strontium bromide burns bright red in a flame test.
First flame test.
This method of qualitative analysis is called a flame test.
Optional flame test.
This flame test may vary from one country to another.
This same effect identifies strontium cations in the flame test.
The flame test is a more well known version of the chemical test.
A convenient method to detect the presence of copper salts is a flame test.
The flame retardancy was evaluated by a vertical flame test using the prepared test piece.
A very simple way to see this phenomenon is to do what is called a flame test.
Flame retardant Compliant with various flame test requirements and standards.
When the flame test is done the mode of use is,.
The culminating event for the day was a flame test demonstration.
Repeat the Ignition and Flame Test procedures described above for each rangetop burner.
See also
Therefore, platinum wire is crucial for a flame test.
Repeat these Ignition and Flame Test procedures for each rangetop burner.
Roof system is penetrated within 30 minutes but is not penetrated in the preliminary flame test.
Sample is then subjected to a flame test as described below,.
In addition, a platinum wire must be thoroughly cleaned before using it for a new flame test.
Its density, cleavage and flame test for lithium are diagnostic.
Since amblygonite has lithium in its formula, it gives a reliable lithium result with a flame test.
To meet the vertical flame test requirement, large amounts of flame retardants are usually needed.
In the laboratories the girls were allowed to observe a flame test of flame-retardant foam products.
The vertical flame test measures the extent of charring ( inches ) and the amount of afterburning.
In a, its copper emit a deep green light, a much deeper green than the flame test for.
The samples tested as per vertical flame test has less than 2 seconds after-flame.
The flame test uses a Bunsen burner using methane gas with a 1 inch flame.
The results of the gas flame test are provided in Table 1.
Each foam has a monomodal cell size distribution and passes the B2 flame test.
The flame detector test and false flame test start immediately after the tolerated post-combustion time.
The flammability was determined vía the method described in the Underwriters Laboratory UL94 Flame Test.
Repeat the Ignition and Flame Test procedures, described for each rangetop burner.
FIG . 1 illustrates the state of a vertical flame test.
It's just a flame test reaction.
Engage dramatic entrance . Flame test.
Flame test warning:.
Light sequence . Flame test.
The obtained compound ( 6 ) showed yellow in a flame test.
Copper ( I ) burns blue in a flame test.
The obtained compound ( 6 ) K salt showed purple in a flame test.
UC: Okay class, I'm going to demonstrate a flame test.
You'll also be interested in:
Examples of using Test
Show more
Mechanical tensile test prehoistable navigation lights
A test with tripping is compulsory on installation startup
Before the test we had art class
Examples of using Flame
Show more
Flame retardant materials bear the mark
Envision the flame burning within you
Flame disk or combustion heads dirty or worn
