Examples of 'flange nut' in a sentence
Meaning of "flange nut"
A flange nut is a type of nut that has a wide, circular base (flange) which helps distribute the load and provides extra stability when tightened
How to use "flange nut" in a sentence
Basic
Advanced
flange nut
Install flange nut and tighten securely.
Assemble mast bolts with hex flange nut loose enough.
Open the flange nut with the face spanner.
Before setting the machine into motion tighten flange nut.
Loosen and remove flange nut from spindle.
Install flange nut with the flange against the blade spacer and securely tighten.
Press in the spindle lock button while turning flange nut clockwise.
Secure with the flange nut removed earlier.
Flange Nut Remove pulley with belts.
Always install a washer or flange nut against all plastic components.
Using the special Snap-Tite flange socket, loosen and remove the flange nut.
Tighten flange nut securely with the wrench provided.
Remove and discard the edger blade but retain the flange nut and flat washer.
Place the flange nut on the spindle an tighten it using.
If removed, reassemble disc flange, grinding wheel and flange nut and tighten securely.
See also
Position the flange nut over the spindle according to wheel thickness.
When using a pad on a threaded arbor, make certain the flange nut is tightened securely.
Or flange nut.
Install the flat washer, replacement edger blade, and flange nut removed earlier.
Thread the flange nut on the spindle with the flat side of nut facing up.
Install the replacement edger blade and the flange nut removed in Step 2.
Remove the flange nut that secures the auger pulley to the auger shaft.
Lock the back stop in position with a flange nut Fig 10.
Wipe the flange, flange nut and spindle to remove.
Flange nut 6.4 Motor It is vital for the motor to be well ventilated during operation.
Depress spindle lock button and rotate flange nut with provided wrench until spindle locks.
Slide bracket ( B ) into position, and install the square neck carriage head bolt and flange nut C.
Loosen flange nut 3 by means of the face pin spanner.
Spindle, and remove the flange nut and cutting blade.
Secure using phillips head screw (A) and hex flange nut C.
Wipe the flange, flange nut and spindle to remove dust and debris.
Secure the bolt with an M6 flange nut.
Secure with the flange nut removed in Step 1.
Secure handle to handle bracket with screw ( 7 ) and flange nut 8.
Position wood and remove flange nut as shown in Figure 9.
Hold the finger ( B ) or guide ( D ) to prevent turning while tightening flange nut.
Install the flange nut and tighten see Figure 5.
Secure handle to lid using phillips head screw ( A ) and hex flange nut ( C ) as shown.
The Cutting discs, spacer discs and the flange nut might heat up enormously during operation.
You'll also be interested in:
Examples of using Nut
Show more
I am kind of a hard nut to crack in that department
A nut who knows a lot about bombs
Loosen the bottom nut to eliminate water
Examples of using Flange
Show more
Flange keepers are beneath lip of chute base
Place the external flange on the spindle
Wheel flange marks on rail joint bars
