Examples of 'flare nut' in a sentence
Meaning of "flare nut"
flare nut ~ A flare nut is a type of fitting used in plumbing and automotive applications, designed with a flared end to make a secure connection with a corresponding flare fitting
Show more definitions
- A nut to secure a flared tubing‘s tapered end.
How to use "flare nut" in a sentence
Basic
Advanced
flare nut
Tighten the flare nut with a wrench.
Flare nut wrench.
Do not reuse a flare nut to prevent gas leaks.
Flare nut and flare works are also different from those of the conventional refrigerant.
Make sure that the flare nut is fitted.
A flare nut and a wrench that fits it.
Replace it with the supplied flare nut and then process it to a flare.
Use an appropriate wrench to avoid damaging the connection thread by overtightening the flare nut.
Put the flare nut on the pipe.
Align the center of the pipings and sufficiently tighten the flare nut by hand.
Freezing of the flare nut may cause refrigerant leak.
Align the center of the pipes and sufficiently tighten the flare nut by hand.
Use the flare nut fixed to the main unit.
Distance measured from the floor to the flare nut of the refrigerant piping.
Fasten a flare nut with a torque wrench as specified in this manual.
See also
From that position further tighten the flare nut to the angle listed below.
Tighten the flare nut with a torque wrench in the specified manner.
The graph is based on the height measured from the floor to the flare nut.
Remove the flare nut and cap of the indoor unit.
Coat the flare inner surface with ether oil or ester oil when connecting a flare nut.
Do not use the flare nut in the indoor unit accessory.
Torque wrench b Spanner c Piping union d Flare nut a b c d.
Tighten the flare nut with a torque wrench as specified in the table.
Indoor unit tubing Flare nut Pipings.
Tighten the flare nut according to the specified method such as with a torque wrench.
Torque wrench b Spanner c Piping union d Flare nut.
Do not apply refrigeration oil to the flare nut to avoid tightening with excessive torque.
Turn the flare nut beyond this point by the angle shown in the table above.
Using a torque wrench, tighten the flare nut in the specified method.
Tighten the flare nut using a spanner until the tightening torque suddenly increases.
Align the center of the pipes and finger-tighten the flare nut.
Flare nut tightening torque Gas side.
Turn seams up Flare nut connection.
Flare nut Flare nut tightening torque.
Sufficiently tighten the flare nut with fingers, and then tighten it with a spanner.
Flare nut tightening torque Gas side Liquid side.
It is therefore a principal object of the invention to provide a reliable, leak-free flare nut union.
If a flare nut cracks, the refrigerant may leak.
From that position, further tighten the flare nut within the angle shown below.
Factory flare nut attachment to the heat-exchanger.
ALWAYS use 2 wrenches together when loosening a flare nut.
Use an 8 mm flare nut wrench to unthread the compression nut.
Torque wrench b Spanner c Piping union d Flare nut 5 Installation.
Use an 8 mm flare nut wrench to remove the hose compression nut.
Use 2 wrenches to tighten the flare nut.
Insert a flare nut into the pipe, and then flare the.
For connection first align the center, then tighten the first 3 to 4 turns of flare nut.
Finally, tighten the flare nut with torque wrench until the wrench clicks.
To connect, first align the center, then tighten the first 3 to 4 turns of flare nut.
When fastened too tight, flare nut may eventually break and cause refrigerant leakage.
You'll also be interested in:
Examples of using Flare
Show more
Your nostrils flare when you sleep
The flare connection should be installed outdoors
A very large solar flare is approaching release
Examples of using Nut
Show more
I am kind of a hard nut to crack in that department
A nut who knows a lot about bombs
Loosen the bottom nut to eliminate water
