Examples of 'foaming temperature' in a sentence
Meaning of "foaming temperature"
foaming temperature: Refers to the specific heat at which a substance starts to foam or bubble due to the effects of temperature
How to use "foaming temperature" in a sentence
Basic
Advanced
foaming temperature
The suitable foaming temperature depends on polymer properties.
The gel was cooled down to an optimum foaming temperature.
Foams were prepared over both a foaming temperature range and a blowing agent level range.
The clamps could be heated to a maximum of the foaming temperature.
The high foaming temperature apparently caused this relatively high level of open cells.
The foamed product density varied depending on the foaming temperature.
The effect of foaming temperature was less meaningful with oat drinks than with milks.
The second temperature or die melt temperature is typically the foaming temperature.
The foaming temperature affected the volume of foam more than the age of the milk.
The temperature of the foamable gel was reduced in the cooler to a suitable foaming temperature.
Then, the foaming temperature is retained for a certain period of time.
The foam volume can be calculated from mass balance and foaming temperature.
Desirable foaming temperature ranges for making open-cell foams were determined.
The cap layer 34 is constituted by a crosslinked rubber having a low foaming temperature.
Proper selection of foaming temperature ensures a fine, homogeneous dispersion of water in the foamable gel.
See also
The non-foamed plastic balloons were heated to the foaming temperature and instantaneously foamed.
If the foaming temperature is lower than 70 °C, viscosity may increase, undesirably deteriorating handleability.
Also volatile liquids which provide a gas at the gas foaming temperature may be used, e . g.
A rubber having a high foaming temperature is used for the under layer 30 and the base layer 32.
Most preferably, the second foamable gel is further cooled to a suitable or optimum foaming temperature.
The foaming temperature of the formulation was approximately 150°C.
Table 1 relates the foam density and open cell content with the foaming temperature.
At a foaming temperature higher than 164°C, the foam collapsed totally or partially.
A second extruder produces a solid plastic at a temperature at least 25°F from the foaming temperature.
The foaming temperature was 108°C, all other process conditions were the same as before.
Example 3 The Example 2 is repeated except that the foaming temperature is increased to 133°C.
Use of LDPE / ESI resin blends afforded a significant increase of the foaming temperature window to 3-4°C.
You'll also be interested in:
Examples of using Foaming
Show more
Foaming at the mouth like a sick trelkez
Eyes rolling and foaming at the mouth
Foaming of the solution on reconstitution may occur
Examples of using Temperature
Show more
Manufacturer of the separate temperature measuring equipment
Actual temperature below low temperature value
Select the desired temperature with and
