Examples of 'fracture surfaces' in a sentence
Meaning of "fracture surfaces"
fracture surfaces - This phrase refers to the separate sides of a broken object or material that displays a crack or break
How to use "fracture surfaces" in a sentence
Basic
Advanced
fracture surfaces
No phosphorus has been found on the fracture surfaces.
The fracture surfaces at the hub were smoothed over.
It also produces undesirable sharp fracture surfaces.
Barely repulsed the fracture surfaces that aizen produced.
Areas of fine dispersed black inclusions were revealed on their fracture surfaces.
Two of the exposed fracture surfaces appeared to be polished and shiny.
The rupture of a bridge gives origin to two fragments and two fracture surfaces.
The fracture surfaces are mainly transgranular for all conditions examined.
Fractography is the study of the fracture surfaces of materials.
Fracture surfaces of materials that failed in a brittle manner will have their own.
The presence of moisture in the fracture surfaces increases with ageing times.
These low results were caused by large exogeneous inclusions present at the bend fracture surfaces.
Said cleavage facets show fracture surfaces of fragile grains of the material.
SEM micrographs show the nanoplatelets were projecting out of the fracture surfaces.
Stellerite lines cavities and fracture surfaces in volcanic rocks altered by hydrothermal solutions.
See also
For each sample, several microphotographies of the fracture surfaces were recorded.
Inspection of the fracture surfaces under the scanning electron microscope revealed overstress failures.
Secondary mineralisations cover the central fracture surfaces and the mylonitic edges.
The atomic features of fracture surfaces in natural aggregates will determine their reactivity in concrete.
That there were no pre-existing defects or fatigue cracks on the fracture surfaces.
Examination of fracture surfaces revealed remarkable adhesion between the fluorocarbon polymer and the glass.
Six of the failed compressor blade roots had partial, readable fracture surfaces.
The fracture surfaces of the specimen were observed by post compression micro CT imaging.
After breakage, the fracture surfaces were examined.
The fracture surfaces were then shadowed with Pt and overcast with a layer of carbon.
The intercrystalline share of the fracture surfaces was below 3 % in all specimens.
The fracture surfaces were studied with a SEM to locate the site of fatigue crack nucleation.
It has subvitreous luster of fracture surfaces and reddish-orange streak.
The fracture surfaces show crystal of TiB cleaved along the b-axis.
After slab failure, sharply defined fracture surfaces remain at the starting zone.
Again fracture surfaces were prepared for SEM examination.
A transverse defect4 was present on 1 of the fracture surfaces.
The fracture surfaces of samples 5 and 6 alone propagated entirely through the matrix.
The pre-existing defects found on the fracture surfaces were fatigue defects identified as detail fractures.
The fracture surfaces were examined light-optically and under the scanning electron microscope.
Fissuring - small crack-like discontinuities with only slight separation ( opening displacement ) of the fracture surfaces.
Moreover, often the fracture surfaces have pointed edges which even sometimes form a cutting edge.
Fissuring-small crack-like discontinuities with only slight separation ( opening displacement ) of the fracture surfaces.
These fracture surfaces were then investigated with the scanning electron microscope ( SEM ).
Fissure - a small crack-like discontinuity with only slight separation ( opening displacement ) of the fracture surfaces.
Cryo-SEM images of flat fracture surfaces of unaerated ice confection are sufficient for this.
These decohesions of a brittle character are perfectly visible on fracture surfaces ( Fig . 19 ).
The fracture surfaces at the sides ( radial fractures ) were rough.
FIG . 3 is an SEM characterization of fracture surfaces of a reference material.
Green symbols, fracture surfaces ( filled symbols correspond to the highest applied load ).
The fracture surfaces have a 2-3 mm wide, dark discoloration in the middle.
Figure 3, Fracture surfaces of the wing rails of the frog.
Some of the fracture surfaces on these spikes - 22 - were shiny.
Finally the so obtained fracture surfaces were examined under a scanning electron microscope ( SEM ) ( magnification x4000 ).
You'll also be interested in:
Examples of using Surfaces
Show more
Never work on unstable surfaces or steep terrain
The surfaces remain hot after operation
Do not use on wet surfaces or pick up any
Examples of using Fracture
Show more
A little fracture below the brain area
Looks like a hip and femur fracture
Posterior cranial fracture and subdural hematoma
