Examples of 'full turn' in a sentence
Meaning of "full turn"
Full turn refers to a complete rotation or revolution of an object or a person around a fixed point. It implies that the object or person has completed a 360-degree turn, returning to its original position or orientation. The term is commonly used to describe rotational movements in various contexts, including physical motion, dance, vehicle maneuvers, or turning objects
How to use "full turn" in a sentence
Basic
Advanced
full turn
Then open it one full turn counterclockwise.
Down here they will be full turn.
A full turn sends you backwards.
Leave at least one full turn on each.
Each full turn starts with the deployment phase.
Before it even made one full turn.
A full turn is a practical compromise.
Then rotate it another full turn.
A full turn around is brilliant.
Turn the valve counterclockwise one full turn.
Make one full turn.
The adjustment knob has detents every full turn.
A domino needs a full turn to get back to the same place.
You are giving her a full turn.
Be opened full turn so that quick shut off con be mode in an emergency.
See also
Then tighten the nut one more full turn.
Turn the knob almost one full turn in the clockwise direction.
Begin at a low setting by turning counterclockwise one full turn.
Rotate the locking wheel one full turn in each direction.
Full turn of.
I did not get my full turn.
Rotate the ring a full turn to the right to permit removal of the headshell.
Then tighten the nut one additional full turn.
It is driven through one more full turn for each new insertion cycle.
So please do not make more than one full turn.
Twist the protective cover one full turn until it separates from the lancet.
Do not turn the lens more than one full turn.
The timer is reduced by one each full turn after the player finishes their turn.
Turn the legs clockwise and tighten to the nearest full turn.
Each spiral groove makes at least one full turn around the disk central axis.
Do not turn the upper housing more than one full turn.
The stirrer was positioned one full turn from the flask bottom once the oligomer melted.
Maybe it was never a full turn.
One full turn adjusts the milling depth by 1 mm.
Be sure to make a full turn.
One full turn equals 5 cm of trolley travel.
A wheel is driven to rotate a fraction of a full turn about its axis.
One full turn of the locator equals 1 mm change in depth.
The cap should be rotated clockwise or counter clockwise one full turn.
When the recovery tank is full turn the master switch OFF.
With fasteners that have only one countersunk peripheral surface adjustment requires a full turn.
This function is normally used to protect servos at full turn from mechanical limit stops.
For example the stepper motor may assume four different alignments within a full turn.
So, one full turn of the wheel is indicated by the kingspoke.
The question is also asking us what fraction of a full turn this would be.
One full turn of the locking sleeve moves the locator 2 mm.
Then tighten the screws a minimum of one full turn using both hands.
So, one full turn of the wheel is indicated by the king spoke.
Tighten compression nut handtight plus 1 full turn.
The rotating bezel one full turn clockwise, until the desired time.
You'll also be interested in:
Examples of using Turn
Show more
Persuade him to turn over a new leaf
Now turn around and meet him
The unit does not turn on when installed
Examples of using Full
Show more
The world was full of startling new concepts
Full transition to new system of administration of justice
They are always full of coy little tricks
