Examples of 'gain controls' in a sentence
Meaning of "gain controls"
The phrase 'gain controls' refers to the settings or mechanisms by which the level or strength of a signal is adjusted or regulated. In audio or electronic equipment, gain controls are used to amplify or attenuate an audio, electrical, or other type of signal. They allow the user to increase or decrease the volume, sensitivity, or intensity of the signal in order to achieve the desired output
How to use "gain controls" in a sentence
Basic
Advanced
gain controls
Separate input and output gain controls.
Gain controls for each channel.
This unit features detented gain controls.
All three gain controls should be set identically.
It may not be necessary to adjust tone and gain controls.
Gain controls define only desired band gains.
Automatic amplifier gain controls do exist.
Gain controls the amount of detail displayed on the screen.
Volume and gain controls.
And the gain controls at the mixing console so that.
Increase or decrease the equalizer gain controls to suit your taste.
Gain controls for the input amplification of phono inputs.
Check that both the input and output gain controls are advanced sufficiently.
Actual frequency response of the equalizer is shown on the diagram below gain controls.
Use the microphone gain controls to adjust the microphone level to your voice.
See also
Lead channel has pre / post gain controls only.
Set the corresponding gain controls and the channel faders to their lowest position.
In stereo mode, both channels operate independently, with their input gain controls.
Rotating the gain controls will adjust the brightness of the different colours individually.
Make sure nobody can reach the Gain controls of the amplifier.
Gain controls in the mono channels, selector.
Turn the Left and Right Gain controls all the way down.
Turn gain controls to minimum, switch on the amplifier.
Before applying power, check all connections and turn down the gain controls.
Adjust the Input gain controls based on the incoming signal levels.
Once baseline signals were obtained, the instrument 's time intensity gain controls were not altered.
A Turn all Gain controls counterclockwise to.
Using a small flathead screwdriver, adjust the AUX gain controls located on the top of.
Now turn the input gain controls of the installed amplifier anti-clockwise to its minimum position.
Make sure the master volume, level and gain controls are all the way down.
The setting of the gain controls may also be performed via the pre-fader testing / listening facility.
The front panel features clip / protect LED indicators and separate marked gain controls for each channel.
Normally, set the gain controls to the NORMAL position.
The subwoofer 's output level is controlled using the Subwoofer Gain controls.
The power switch, gain controls and LED indicators are on the front panel.
Last of all is the Mix module, with Pan and Gain controls.
Gain controls for the input amplification of the stereo channels 1 to 4 2.
A small flat-head screwdriver to adjust the AUX gain controls if you connect an MP3.
Gain controls for adjusting the input amplification for channels 1 to 4 7.
It further helps to set the gain controls ( 8 ) correctly for proper gain balance.
Gain controls Adjust the input amplification for channels 1 and 2.
After having connected your amplifier to the mains, turn both gain controls counter-clockwise to null-position.
First turn down the gain controls [ 7 ] of the input channels to the left stop position.
After having connected your amplifier to the mains, turn both gain controls counter-clockwise to Min-position.
Open the Gain controls from the amplifier ( 3 ) until the maximum desired sound level.
Input selector switches for channels 1 to 4 6 Gain controls for adjusting the input amplification 7.
The gain controls have a variation margin of ± 20dB.
Selector buttons for the inputs of channels 1 to 4 3 Gain controls for adjusting the input amplification 4.
Low, Mid, High and Gain controls on each channel.
Now adjust the volume with the gain controls CH1 and CH2.
You'll also be interested in:
Examples of using Controls
Show more
Turn off all controls before unplugging
Controls that ensure firearms are securely stored
The digital controls go out during use
Examples of using Gain
Show more
Gain fury when swapping weapons in combat
Interest income and gain on sale of securities
Gain consumer confidence in new forestry practices
