Examples of 'gas nozzle' in a sentence
Meaning of "gas nozzle"
gas nozzle: This phrase refers to the device used for dispensing fuel, typically gasoline, into a vehicle's tank. It is commonly used when refueling vehicles at gas stations or during discussions about automotive maintenance and fuel efficiency
How to use "gas nozzle" in a sentence
Basic
Advanced
gas nozzle
Contact tip and gas nozzle installation a.
Replace contact tip and gas nozzle.
Replace the gas nozzle or gasless nozzle.
The housing also includes a gas nozzle.
Arc between gas nozzle and workpiece.
Remove spatter from inside of gas nozzle and.
Screw the gas nozzle into its place.
Remove the tapered gas nozzle.
The gas nozzle is provided with a magnetic site.
Slide off the gas nozzle.
Remove the gas nozzle and the contact tip.
Connection for measuring the pressure in gas nozzle x x x x x.
In that case the gas nozzle can be used instead.
Show a section of the gas nozzle.
Remove gas nozzle and contact tip from end of gun.
See also
Inner recycle gas nozzle tip.
Shows a section of the lower part of the gas nozzle.
Outer recycle gas nozzle tip.
An exhaust gas nozzle may be introduced through said further opening.
Spatter bridge between contact tip and gas nozzle.
Screw the appropriate fixed gas nozzle fully onto the diffuser.
The inert gas is charged to the production device vÃa the gas nozzle.
I have forgotten to take the gas nozzle out of my car.
The torch gas nozzle can get clogged due to butane gas impurities.
Check that the diffuser and the gas nozzle of the.
Remove the gas nozzle and unscrew the current nozzle of the torch.
The positive pole of the sensor is connected either to a welding plus or a gas nozzle.
The metal spatter plugs a gas nozzle part of the welding torch.
The same preferably applies to the first and second flow gas nozzle.
Be sure the gas nozzle is fully screwed onto the diffuser for gas shielded processes.
Remove welding spatter from the contact tip and clean the gas nozzle.
Adjust the gas nozzle as appropriate for the GMAW process to be used.
Reassemble the torch in the wire feeder connector and assemble the gas nozzle.
Shielding gas nozzle This nozzle must be periodically cleaned to remove weld spatter.
Significant production time is lost cleaning the gas nozzle part of the welding torch.
The combustion chamber is in direct fluid communication with the distributed charge through a gas nozzle.
A gas nozzle is mounted on a back surface of the Faraday disk rear cover plate.
This will give improved visibility and eliminate the possibility of the gas nozzle overheating.
The gas nozzle is clogged, defective or worn.
The air stream is preferably a pressurized stream of compressed air emitted from a conventional gas nozzle.
Diameter of gas nozzle in mm corresponds to gas flow in l / min.
Remove the protective cap from the LP cylinder gas nozzle.
Remove the gas nozzle from the gun by unscrewing counter-clockwise.
What can happen if there is no cleaning or gas nozzle is defective,.
The gas nozzle clicked, even though the car was only three quarters full.
Does it work for installation of new gas nozzle and gas burner?
Specifically, a gas nozzle NZ for injecting gas is arranged concentrically inside a tube TB.
Preferably, a slippery coating is applied onto a surface of the gas nozzle.
The acoustic generator comprises an axial gas nozzle provided within a co-axial cylinder for air.
The balance plate 7 is a rubber plate with a weight equivalent to the gas nozzle.
You'll also be interested in:
Examples of using Gas
Show more
Hope you like gas station taquitos
Gas can make you do funny things
Verify the gas line has been purged
Examples of using Nozzle
Show more
Replace nozzle and bring in tight to body
Attach the textile turbo nozzle to tubes
Each nozzle can be individually closed or calibrated
