Examples of 'gear lubricant' in a sentence
Meaning of "gear lubricant"
gear lubricant: A substance used to reduce friction and wear between moving mechanical parts in a gear system, typically applied to ensure smooth operation and longevity of the equipment
How to use "gear lubricant" in a sentence
Basic
Advanced
gear lubricant
Filler hole for gear lubricant.
STIHL gear lubricant for brushcutters.
Procedure for qualifying synthetic base gear lubricant.
These products are described as gear lubricant additives and as intermediates for preparing lubricant additives.
The same test was run on an equivalent mineral based open gear lubricant.
Dispose of chips and used gear lubricant oil according to.
The composition, however, is particularly well suited for use as an open gear lubricant.
Thus, the basic requirements for an open gear lubricant can be listed as follows.
Use STIHL gear lubricant for brushcutters * for lubricating the gearbox.
As can be seen by the figures, the synthetic gear lubricant maintained a much cleaner appearance.
Use STIHL gear lubricant for hedge trimmers ( special accessory ) to lubricate the blade drive gear.
Attention, Never simply throw away used engine oil and gear lubricant environmental protection.
Need not refill gear lubricant or maintenance, and double-planetary.
Safety glasses - STIHL resin solvent - STIHL gear lubricant for hedge.
Suitable for hydraulic oil, gear lubricant oil, lubricating oil, motor oil and water-glycine.
See also
The SAE J306 describes viscometric qualifications for axle and gear lubricant compositions.
Use STIHL gear lubricant ( special accessory ) for lubrication.
Have gearbox topped up with STIHL gear lubricant by servicing dealer1 X.
If the motor or wheelsets are replaced, generously lubricate the gears with LGB Gear Lubricant 51020.
Lubricate the angle drive with STIHL gear lubricant for brushcutters - see " Special Accessories.
Gear lubricant compositions are classified by the American Petroleum Institute ( " API " ) using " GL " ratings.
Lubricate the blade drive gear with STIHL gear lubricant for hedge trimmers - see " Special Accessories.
Furthermore, a petroleum based gear lubricant was utilized in the transmissions shown in Figures 1g through 1i.
After every 2000 working hours exchange the gear lubricant oil or the mixer motor.
You'll also be interested in:
Examples of using Lubricant
Show more
Do not add lubricant to motor or brush roll
To lubricate the slides with graphite lubricant
Use a cutting lubricant when drilling metals
Examples of using Gear
Show more
Automatic start gear detection active or not
Gear choice for deceleration or cruise phases
Inspection of draw gear and chafing irons
