Examples of 'groove can' in a sentence
Meaning of "groove can"
groove can - This is an unclear phrase without proper context. It could potentially refer to a can with grooves or indentations, but further clarification is needed
How to use "groove can" in a sentence
Basic
Advanced
groove can
The groove can be formed on the collar.
Finding your curriculum groove can take some time.
Glasses groove can accommodate riders with glasses.
The axial displacement of the bead and annular groove can vary.
A groove can then be uncovered if it is required.
This is because no machined groove can or should be machined with a square edge.
A groove can also be formed by using mold shells of appropriate form.
The whole or parts of the groove can be designed with a rough surface.
The groove can be made using a cutter with a sickleshaped blade.
Only paper rolls with such a groove can be inserted into the dispenser.
The groove can be provided with a sealing ring.
The zones of normal strength of the groove can have the same thickness throughout.
The groove can be filled with any suitable means.
The male tongue and female groove can also be the other way round.
Such a groove can multiply by ten the value of said frequencies.
See also
Also, only a single engagement groove can be formed.
Each longitudinal groove can be delimited by longitudinal webs.
Prior to welding dissimilar materials, one or both faces of the groove can be buttered.
The groove can be helical.
In other examples, the sliding groove can also be absent.
Such a groove can be conveniently produced using anisotropic etching techniques.
Where there is a groove, the groove can be inward of the edge.
A groove can connect several compartments for receiving the composition.
To this purpose a helical groove can be provided in the wall of the bore.
A groove can also be provided in each of the opposing gear wheel rims.
With this alternative form, the groove can be completely closed.
The groove can preferably have the profile of a circle segment.
Alternatively, the cross section of the groove can be ramped in shape.
The pitch of the groove can be varied to provide variations in rigidity.
Thus, the shape of the wire and of the groove can be modified slightly.
The peripheral groove can be segmented in order to achieve a more stable position.
In one example, the groove walls of the groove can be parallel to one another.
A spiral groove can be provided in the crank and a pin in the groove.
Optionally, the depth of the groove can vary along its length.
The groove can be formed along a course of a ring shape of the set ring.
For example, the control valve gasket groove can be modified in many ways.
The circumferential groove can advantageously serve as a housing for a pressure monitoring device.
Likewise, the diameter of the wire and the angle of the groove can be varied.
A single groove can be envisaged.
Figure 17 shows a modified form which the groove can take.
The depth of the groove can be constant between its ends.
In fact, if the wire is thinner, the spiral groove can also be narrower.
The depth of the groove can be adjusted to vary the stress relief.
For longitudinal guiding ( arrow 36 ), a system of rib-members each associated with a groove can be provided.
More than one groove can be present in the lower mould surface.
Optionally the width of the internal and / or external groove can be increased at a constant pitch.
The groove can be created for instance by machining into the mother plate.
The seating, the opening and the groove can be produced when casting the housing.
Each groove can include two groove portions on both sides of the sawing region.
In order to facilitate the reception process the ring groove can have a rounded cross-sectional shape.
