Examples of 'groove depth' in a sentence
Meaning of "groove depth"
Groove depth: It is the measurement of the depth of a groove, channel, or indentation. The term is often used in engineering, construction, and manufacturing contexts
How to use "groove depth" in a sentence
Basic
Advanced
groove depth
If groove depth is less than specified.
Variable groove depth.
This was photographed on an angle to show ridge height and groove depth.
Use of groove depth information in marketing.
This process is repeated until the desired groove depth is achieved.
Solved within the groove depth of the problem of the precision of groovings.
A change in dam width can replace or supplement the groove depth parameter difference.
The resulting groove depth in the laminate surface was measured to determine abrasion resistance.
The cap may comprise an área of depth substantially equal to the groove depth.
Problems also exist if the groove depth and pitch are too small.
The nail groove depth reaches half of the nail anvil plate material thickness.
The saw arbor has a single adjustment system made for easy groove depth positioning.
This starting end groove depth will gradually increase to the finish form depth.
When using this stack good modulation is possible combined with the strongly reduced groove depth.
Changing the groove depth and width by changing the light intensity during optical disc mastering.
See also
Thus the grooves are very shallow compared with the normal groove depth for standard markings.
A groove depth d in the groove G is defined as explained below.
Quick, simple adjustment system ensuring a constant groove depth.
A groove depth d in the groove G is defined as explained bellow.
As for the tires, it is recommended that the groove depth be at least 3 millimeters.
Once groove depth is determined, additional grooves will have the same depth.
Place the screw 4 for fixing the groove depth back and tighten it.
Thereafter, the running wear resistance was evaluated by measuring the remaining groove depth.
For a given modulator, groove depth is proportional to the charge magnitude and distribution.
Back the depth adjustment knob off to leave proper distance for groove depth figure 5.
The groove depth and width is preferably uniform, however, could vary significantly if desired.
The same mold shell, except for groove depth differences, was used to manufacture both tires.
The vertical connection consists of a tongue and a tongue groove having a tongue groove depth of 4.2 mm.
The permitted groove depth and width depend on groove length, the wall thickness and structure.
Groove portion width, groove wall angle and groove depth are shown in Table 1 as below.
The optical groove depth is represented by a function of a wavelength " L " of a laser beam.
Screw for fixing the groove depth 5.
If groove depth is less than specified, N Replace the guide bar.
The asymmetric grating may have a smaller groove depth and / or a longer pitch than the symmetric grating.
The groove depth is preferably in the range of 2 to 8 mm.
The above figures apply for a groove depth of 4 to 7 mm.
At a groove depth GL0 of 35 nm this variation is substantially absent.
Dismounting, Unwind the screw 4 for fixing the groove depth entirely.
Periodically check groove depth with a “ pi ” or diameter tape.
In one embodiment, groove 219 is formed to have a constant groove depth.
In another aspect the groove depth may vary, e . g. in periodic modulations.
In one example, groove 219 is formed to have a constant groove depth.
Easy - Same groove depth for both sides.
Body width W of retaining member 90 is greater than groove depth A of groove 41.
The groove depth in Sample 7 was zero.
In the case of the grating of Figure 3, the groove depth should be about 0.6 micron.
Remaining groove depth of test tire / remaining groove depth of control tire x 100.
Preferably, the minimum groove depth is at least 15 microns.
Setting the groove depth Page 11 Installing the dust extraction adapter Page 11.
A DVD+RW substrate with a groove depth of about 35 nm, according to the invention, was used.
You'll also be interested in:
Examples of using Groove
Show more
A small groove or mark on a pan does not effect
Pick the closest groove to the mark
Oil groove on the chain bar is blocked
Examples of using Depth
Show more
A small amount of depth of cut can be obtained by
Depth measurement also includes door handle
Reassemble the depth guide and reattach
