Examples of 'groove width' in a sentence
Meaning of "groove width"
groove width - This technical term is commonly used in design, engineering, or manufacturing contexts to refer to the measurement of the width of a groove or indentation in a surface or material
How to use "groove width" in a sentence
Basic
Advanced
groove width
Select the desired groove width.
The groove width is set with the spacer discs.
Parameter d is the sum of ridge and groove width.
Three tires per each groove width ratio are prepared.
This makes it possible to suppress the widening of the groove width.
Adjusting the groove width the distance between the two diamond wheels.
The extra spaces are formed by widening a groove width of the guide groove.
The groove width and depth may be about the same as the cord diameter.
The subjects actively stroked their fingertips over gratings that varied in groove width.
The groove width adjusting mechanism moves the movable pulley to adjust transmission gear ratio continuously.
Therefore, the stress concentrates on the inner groove having the smaller groove width.
One groove width for Planet RF and FT even floors.
All seven spacer washers 13 must be mounted regardless of groove width.
One groove width for Planet RH and HS even floors.
The depth of the rainwater groove 28 is changed irrespective of the above-mentioned groove width.
See also
One groove width for Planet HS and RH uneven floors.
The half-cut may have a rectangular sectional shape and a groove width of 15 µm or less.
I is a groove width of the fixed scroll ;.
The locking plate 7 has a thickness which is not greater than the groove width ( b ).
This groove width controls the penetration length of the wave into the circular “ mirror ”.
Specifically, the projecting portion 7 is formed across the whole groove width W2 of the circumferential groove 2.
The bevel groove width is set at 4mm.
The total width of spacer washers 13, between the wheels, specifies the groove width.
In the illustrated example, the groove width W1 is in the tire circumferential direction.
For groove width and spacers required, see table on page 2.
The actuator 17 drives the groove width adjustment mechanism 16.
Also, a groove width of the lateral groove 40 is referred to as Lls.
Also included is the control unit 600 for controlling the groove width of the primary sheave 13.
The details of the groove width adjustment mechanism 141 will be described later.
That is, the projection parts 500 each are provided across a groove width W of the circumferential groove 50B.
The groove width is also preferably between about 0.8 and 3 mm.
Namely, the protrusion portion 500 is provided throughout the entire groove width W of the circumferential groove 50B.
The groove width of the half-cut may be less than 50 µm.
The pitch value for each groove width " w " is the same in each table . TABLE 1.
You'll also be interested in:
Examples of using Width
Show more
Set the width to suit your personal
Apply a border and select a border width
Overall width depends on the seat width
Examples of using Groove
Show more
A small groove or mark on a pan does not effect
Pick the closest groove to the mark
Oil groove on the chain bar is blocked
