Examples of 'guide rods' in a sentence
Meaning of "guide rods"
guide rods ~ rods or bars that provide guidance or stability to a moving or mechanical part. They are commonly found in machinery or systems that require precise movement or alignment
How to use "guide rods" in a sentence
Basic
Advanced
guide rods
On the guide rods of the front headrests.
Clean and oil lateral guide rods regularly.
Guide rods for parallel fence.
Watch for the guide rods.
The guide rods must be kept free of dirt and grime.
Seat for parallel guide rods.
The guide rods are mounted on a sturdy alloy extrusion which is quickly.
Locking knob for guide rods.
The guide rods are hollow and contain the return springs.
Adjusting sliding fit between guide rods and table assembly.
Replace the guide rods of the parallel fence of your router by the.
Edge and mounted on a sturdy base which clamps to the guide rods.
Remove the guide rods and install the trammel bar as shown.
Cast hardened brushes are held in a carrier that moves along guide rods.
Threaded rod and guide rods of blade rise and fall mechanismn.
See also
This allows in particular using lighter and thereby cheaper guide rods.
The holder can be mounted on the guide rods of the front seat headrests.
The guide rods guide a bore forming hollow drill into the intervertebral space.
There may be linear bearings between the guide rods and guide tubes.
Move seat on the guide rods towards the middle of the vehicle up to the.
Various possible options are conceivable to latch the guide rods in the guide means.
According to the invention the guide rods may be provided with individually controllable drive means.
It holds the steel bearings for the barrel lugs and the guide rods.
Press the adapter and remove from the guide rods of the headrest in the di.
It depicts one variation of the assembly formed by the mountings and the guide rods.
A different press plate is slid onto the guide rods and the press mechanism is reassembled.
As a result, the clamping piston slides along the guide rods.
Insert the edge guide rods into the rod holes and tighten the rod screws.
These chains are connected to transversal support and guide rods for the corresponding sleds.
Preferably, the guide rods are provided with individually controllable drive means.
During the closing of the plates, alignment is ensured by guide rods or pins.
The guide means may comprise guide rods and guide tubes for the guide rods.
Guide rods fixed to said motor and supporting said moving member ;.
Periodically, lubricate the guide rods with a light oil or spray lubricant.
Visible in the representations appearing in the figures is just one of the guide rods 34.
More particularly, the distal guide rods 6 are of gooseneck type.
IMPORTANT, Move the cuttinghead to the rear position before locking the guide rods.
Note that at least three guide rods 22 should be provided.
The distance between the containers 9 is maintained by guide rods 19.
By way of example, these guide rods can be welded to the perforated plate 8.
Rotation is imparted to the caps 3 by rotation of the guide rods 1 and 2.
Plurality of vertical guide rods 10 a forming said second guide elements ; and.
Fig . 6 shows a schematic illustration, of a mould assembly provided with protractile guide rods.
The bushes run on two guide rods 7 that are fixed to a floor stand 8.
Guide rods J21 may be provided on the side surfaces of the polishing pad J2.
Similarly, there are arranged guide rods 40 for the chains in the unter guiding means.
Rear-parking markers, or guide rods.
Curved guide rods 22 are located above the cam plate and endless conveyor.
Figure 4 shows a variant in which guide rods 15 are suspended pivotally on rods 21.
Spring guide rods 264 are slidably disposed through the apertures.
You'll also be interested in:
Examples of using Guide
Show more
This guide should be considered an evolving document
Find your subject guide to get started
Guide at any time without prior notice
Examples of using Rods
Show more
My rods will absorb any gamma rays
You can throw rods and things
My rods and cones are all out of whack
