Examples of 'hardness measurements' in a sentence
Meaning of "hardness measurements"
hardness measurements: The evaluation or quantification of the level of hardness of a material or substance, often conducted using specialized tools or techniques
How to use "hardness measurements" in a sentence
Basic
Advanced
hardness measurements
Six more penetration hardness measurements were made.
And hardness measurements have been made.
Corrections to be added to hardness readings for hardness measurements on cylindrical test pieces.
Hardness measurements were performed using nanoindentation on witness coupons.
Scanning tunnelling microscopy methods for roughness and micro hardness measurements.
Hardness measurements quantify the resistance of a material to plastic deformation.
Before testing the samples were ground and polished by a standard technique for hardness measurements.
Seven separate hardness measurements were taken for each part at set positions on the part.
Fracture toughness tests were carried out together with fractographic characterization and hardness measurements.
Micro hardness measurements and TEM observations were intensively used to characterize this gradient.
The mechanical behavior of sae 1010 steel was conducted from vickers hardness measurements.
Hardness measurements at the joint and at the HAZ are consistent with the observed microstructres.
The mass, thickness and hardness measurements are performed on 10 tablets.
Hardness measurements are done with a hardness tester such a Durometer Gauge.
After this, utilizing quartz resonator 56, scanning and hardness measurements are conducted on sample 6.
See also
Rockwell B hardness measurements were performed on the metallurgical crosssections.
Afterwards, one fragment of each broken specimen was randomly selected for vickers hardness measurements ( n=15 ) vhn.
Hardness measurements are carried out with a Shore-D hardness meter.
Persoz hardness, pendulum hardness measurements were carried out on the polymerised film to be tested.
Hardness measurements were then made on polished cross-sections of the coating.
Furthermore, Vickers Hardness measurements have been performed in the different zones.
Hardness measurements vrere carried out on brazed samples from the 4 materials mentioned above.
The mass, thickness and hardness measurements are performed on 10 tablets 12 mm in diameter.
Hardness measurements for various alloys at various temperatures are presented in the table of FIG . 5.
Secondly, hardness measurements are sensitive to the loading history of the tissue.
Hardness measurements made on oil-hardened workpieces yielded values of 857 Vickers in HV50 g.
Therefore, the hardness measurements were not performed after the two-week storage.
The hardness measurements were performed with a Hysitron ® TriboScope, using a calibrated Berkovich ® diamond tip as indenter.
The hardness measurements are shown in Table 4.
Vickers hardness measurements were carried out on nails treated with the composition Example 2 above.
Both hardness measurements are shown in table 18.
Example 12, Hardness measurements The Vickers hardness and Knoop hardness of the composites was measured.
Pencil hardness measurements were taken after curing 24 hours, 48 hours and 7 days at room temperature.
Tablet hardness measurements ( Table 8 ), on the other hand, showed significant variability.
You'll also be interested in:
Examples of using Measurements
Show more
All inch measurements are converted from millimeters
Do not perform capacitance measurements on live circuits
All measurements will be based on interior dimensions
Examples of using Hardness
Show more
Water hardness limitations for steam mode
Understanding of water hardness and other values
The hardness of his gaze makes me doubt it
