Examples of 'hardness measurement' in a sentence
Meaning of "hardness measurement"
hardness measurement: The quantification of the resistance of a material to deformation, scratching, or abrasion, often used in materials science, engineering, and manufacturing to assess the strength or durability of a substance
How to use "hardness measurement" in a sentence
Basic
Advanced
hardness measurement
Hardness measurement after heat treatment.
Device developed for paints and inks superficial hardness measurement.
The hardness measurement method is described before the examples.
Both of these effects add to the error of the hardness measurement.
The shore hardness measurement is made on samples of the test subject itself.
Measuring techniques, process parameters, microstructure evaluation, hardness measurement.
The hardness measurement is in tenths of a millimeter penetration into the surface of an extrudate.
After 1 minute the hardness measurement will appear.
The hardness measurement shall be taken with the component as installed on the vehicle.
The thicknesses of the coatings for the hardness measurement are from about 80 to 100 um.
Hardness measurement is carried out on the stain film using the Persoz hardness test.
After 1 minute the hardness measurement will appear moderately hard water.
The hardness measurement was repeated a total of 3 times with fresh samples and an average taken.
Use of fluid module 45 and hardness measurement module 53 expands the functional possibilities of the device.
The hardness measurement is performed at 20 ° C at the center of five samples of said composition.
See also
The Stevens hardness measurement was performed at ambient temperature.
Surface hardness measurement was continued until a consistent surface hardness reading in excess of 50 was obtained.
The hardness measurement is carried out at 20°C at the center of 5 samples of the composition.
A hardness measurement of 5 mm or less indicates a very hard bar ; 5-12 mm indicates a moderately hard bar.
The hardness measurement is carried out at 20 ° C. at the center of 5 samples.
The hardness measurement is performed at 20 ° C. at the centre of-five samples.
The hardness measurement is performed at 20 ° C. at the center of five samples.
Hardness Measurement was carried out by using a durometer in accordance with JIS K6253.
You'll also be interested in:
Examples of using Hardness
Show more
Water hardness limitations for steam mode
Understanding of water hardness and other values
The hardness of his gaze makes me doubt it
Examples of using Measurement
Show more
Market risk measurement and limits in trading
Systolic or diastolic pressure was outside the measurement
Airflow measurement and revision of test standards
