Examples of 'hardness value' in a sentence
Meaning of "hardness value"
hardness value": "In the context of materials or substances, 'hardness value' refers to a quantitative measurement or scale that indicates the relative hardness or resistance of a material to indentation, scratching, or deformation. It is often expressed numerically and is used to compare and categorize the hardness of different materials.
How to use "hardness value" in a sentence
Basic
Advanced
hardness value
This is the water hardness value currently set.
The hardness value obtained is expressed in megapascals or MPa.
Water hardness unit and water hardness value.
The hardness value in mechanical properties is for reference only.
You need to set the water hardness value.
The hardness value revealed is that of the maximum peak.
The absorbent particulate may be characterized by having a certain hardness value.
The hardness value recorded is that of the maximum peak.
The diameter of the impression was then mathematically calculated to a hardness value.
The selected water hardness value will appear on the display.
These microscopic dents are surrounded by a projecting rim or ridge having a high hardness value.
Find out about the hardness value of your tap water.
The hardness value shall be the arithmetic mean of three tests.
This is consistent with the lower measured hardness value of this adhesive.
The hardness value shall be in the range specified for the design.
See also
Minimum hardness value.
The hardness value is often used as a measure of the degree of cure of a plastic.
Hard dry times measure the point when a maximum hardness value is achieved.
This hardness value equals the force needed to puncture the crust.
The measured area is used in a formula that includes applied force to determine a hardness value.
The hardness value determined during a test is affected by the precision of the test.
Both methods measure the resistance of plastics toward indentation and provide an empirical hardness value.
The higher the pendulum hardness value the more effective the photoinitiator used.
Roughly determined from the Brinell hardness value.
The hardness value determined before the surface of each food gets blackened is different.
A relay closes when the instrument measures a hardness value that is more than the trip point.
The hardness value is then given by EPMATHMARKEREP.
Determine which Rockwell Hardness scale yielded the hardness value.
Select the water hardness value see chapter entitled Rinse aid and refined salt.
Therefore, they are made from steel with a high hardness value.
Material in a larger range, the measured hardness value is more accurate, data repeatability is strong.
The number of complete oscillations multiplied by 2 gives the hardness value.
From these six measurements, the average hardness value and standard deviation were calculated.
The hardness of high precision, automatic measurement, a key that was hardness value.
Note, set machine to the water hardness value which is immedi-ately below the measured value.
Thus, the cooking process is controlled according to the hardness value of each food.
The minimum Rockwell hardness value for their driving squares ;.
In some embodiments, hydration of the biomaterial may lower the shore hardness value.
The Leeb hardness value is calculated using the following formula,.
Especially, a synthetic diamond particle having a large hardness value or strength is preferable.
A material 's Mohs ' hardness value indicates the materials resistance to scratching.
Be careful, the hull reinforcements and the hulls themselves do not increase this hardness value.
Rockwell Hardness value range is typical only ; other values are specified limits.
The toothbrush body is formed of a plastic having a Shore Hardness value of at least 90.
What the water hardness value of your family? You should ask the seller to inspect.
This is assured by the choice of materials for wear elements possessing . Hardness Value.
Particularly suitable fillers have a Mohs Hardness value greater than 4 and preferably greater than 5.
The hardness value related to the force is read from the hardness pen in Newton [ N ].
The pressure pad is formed of an elastomer having a Shore Hardness value no higher than 80.
Preferably, the shore hardness value of the elastomeric material is less than 30.
You'll also be interested in:
Examples of using Value
Show more
Adjustments of value are recognized in the income statement
Promoting and reinforcing local value systems
Farms and market value of agricultural products
Examples of using Hardness
Show more
Water hardness limitations for steam mode
Understanding of water hardness and other values
The hardness of his gaze makes me doubt it
