Examples of 'hardness values' in a sentence
Meaning of "hardness values"
Hardness values are measurements used to determine the resistance of a material to indentation or scratching. In materials science and engineering, it is important to know the hardness values of various substances as it provides information about their strength, durability, and suitability for specific applications
How to use "hardness values" in a sentence
Basic
Advanced
hardness values
Hardness values for single reduced plate.
Typical tensile strength and hardness values.
Hardness values can be automatically converted in many forms.
It is understood that firmness values correspond to hardness values.
Konig hardness values are reported in seconds.
Mixtures of tungsten carbides have intermediate hardness values.
Shore hardness values determined for the manufactured polymers.
An increase in polyurethane fibre resulted in consistently lower hardness values.
Knoop hardness values of greater magnitude are indicative of harder coatings.
Tables of correction factors for hardness values determined on spherical surfaces.
These hardness values imply an increased machinability as well as wear resistance.
Tables of correction factors for hardness values determined on cylindrical surfaces.
These hardness values do not necessarily correlate to other properties or fundamental characteristics.
Both the tablets weights and hardness values display low variability.
The hardness values are based on measurements of the electrical conductivity of the water.
See also
Our product range also includes tuning springs of various hardness values.
In a compilation of hardness values only that of the hydride anion deviates.
The same process applied to other compositions may result in lower hardness values.
The hardness values have been measured at room temperature after tempering at elevated temperatures.
In the study period a stable growth of hardness values is observed in the river mouth.
The hardness values decreased with earlier and later stages of coal formation.
This is also considerably below the hardness values of the resins employed herein.
Hardness values are suitable for specification purposes provided tensile properties are not also specified.
Again DBTL performs best for the initial hardness values.
The specific hardness values can be ultimately designed depending on the balloon length.
Table 4 shows the thickness and hardness values of the layers produced.
Hardness values are presented in figure 2.
A significant decrease in Vickers hardness values appeared in the fourth recast in both alloys.
Knoop hardness values were also measured ; results from multiple determinations are reported for one sample.
High, medium, low three sections of hardness values can be automatically corrected.
Persoz hardness values for the coatings were measured after drying for 3 hours.
Of course, other particle size and hardness values may also be useful.
Cured compound hardness values were typical of highly mineral filled, fire retardant compositions.
Table 2 summarises the thickness and surface hardness values of the layers formed.
Higher Shore hardness values indicate drier or stiffer coatings.
Hence, the rigidity theory has allowed predicting hardness values with respect to composition.
Rather, these hardness values are provided merely as examples.
In another aspect, the tablets also achieve sufficient compressibility to attain desired tablet hardness values.
A comparison of Knoop and Mohs hardness values for conversion purposes is available in standard handbooks.
Mean values of the scatter band for hardness values HV-HRC.
The resulting lipid hardness values and the deposition consistencies are as follows,.
Mean values of the scatter band for hardness values HV-HRA.
Typically, plastic waxes have hardness values and crystalinity less than those of microcrystalline waxes.
Mean values of the scatter band for hardness values HV-HRB.
The measured hardness values are stated in Table 3.
Mean values of the scatter band for hardness values HV-HBW.
The hardness values of the photocured films then were determined using a Shore 00 Durometer.
Table 3 shows Vickers hardness values of these sintered bodies.
The hardness values of these examples was significantly lower compared to Examples 7 and 2 respectively.
Mean values of the scatter band for hardness values HV-HBS.
You'll also be interested in:
Examples of using Hardness
Show more
Water hardness limitations for steam mode
Understanding of water hardness and other values
The hardness of his gaze makes me doubt it
Examples of using Values
Show more
The measured values shall be plotted on a graph
Date and time revert to default values
Carrying values and estimated fair values
