Examples of 'hcl gas' in a sentence
Meaning of "hcl gas"
hcl gas - HCl (Hydrochloric acid) gas is a strong acid gas composed of hydrogen and chlorine. It is commonly used in industrial processes, such as metal cleaning and pickling, as a laboratory reagent, and in chemical manufacturing. HCl gas can be highly corrosive and must be handled with caution due to its acidic nature and potential health hazards
How to use "hcl gas" in a sentence
Basic
Advanced
hcl gas
Excess of HCl gas was removed by a stream of argon.
The mixture was then saturated with HCl gas.
Bubble in HCl gas until a solution is obtained.
The solution was then saturated with HCl gas.
Bubbling HCl gas was continued overnight.
Cool and pass through a stream of anhydrous HCl gas.
A stream of dry HCl gas wasconducted over this.
The expected dihydrochloride is then precipitated with HCl gas.
Violent bumping and HCl gas evolution was observed.
The HCl gas was added until no more precipitation was observed.
The solution was cooled and saturated with HCl gas.
The evolving HCl gas was removed by a constant flow of argon.
Dehydration of lanthanon chloride hydrates done with HCl gas is a tedious process.
Excess HCl gas is then bubbled into the reaction mixture.
The filtrate was acidified by passing HCl gas through the solution.
See also
Dry HCl gas is pearled through the mixture until neutrality.
The product was dissolved in ethyl acetate and saturated with HCl gas.
Additional amounts of HCl gas were added as necessary to drive the reaction to completion.
The pH was adjusted slighty during this time by careful addition of HCl gas.
The liberated HCl gas was removed by inserting a tube into solid sodium hydroxide.
This was taken up in MeOH and the solution was treated with HCl gas.
Then fresh toluene is added and HCl gas is bubbled through the solution.
The solid obtained was dissolved in ethanol and was saturated with HCl gas.
The suspension during the introduction of the HCl gas turned into a solution.
Dry HCl gas was passed into the reaction mixture until a saturated solution was attained.
The barium compounds may be added to the reactor with the HCl gas.
A white precipitate gradually formed as the HCl gas was added to the reaction mixture.
The oily product was diluted with EtOAc and treated with HCl gas.
Exess HCl gas is removed by bubbling nitrogen through the reaction mixture at room temperature.
To the filtrate was added ether saturated with HCl gas to afford a tan oil.
Dry HCl gas bubbled into the the EtOAc solution and a precipitate formed.
The HCl salt is then optionally produced by the addition of HCl gas in ether.
Dry HCl gas is bubbled into the reaction mixture and unreacted HCl is recycled.
This compound was converted to its hydrochloride in isopropyl alcoholwhile blowing HCl gas therein.
Dry HCl gas was bubled through the EtOAc solution and white precipitate formed.
Precipitation of ACH from the leachate by sparging of dry HCl gas.
The flow of HCl gas from the lecture bottle was adjusted with a manual control valve.
HCl acidification may for example be conducted with an aqueous HCl solution or HCl gas.
Anhydrous HCl gas was bubbled into the solution until a white solid precipitated from solution.
The BOC protecting groups can then be removed using a strong acid such as HCl gas.
Dry HCl gas was carefully bubbled into the solution until the white solid stopped precipitating.
The filtrate was again saturated with HCl gas and stirred 6 h.
HCl gas was bubbled through the sol.
Alternatively, the ether solution was treated with dry HCl gas.
HCl gas was bubbled through this solution.
A small amount of n-butyl chloride was added to produce anhydrous HCl gas in situ.
HCl gas was introduced by bubbling through the solution.
The residue was taken up in ether / methylene chloride and precipitated by addition of HCl gas.
HCl gas is then allowed to bubble through the reaction medium.
The mixture was stirred and acidified by bubbling HCl gas through for 3 min.
