Examples of 'head of the screw' in a sentence
Meaning of "head of the screw"
head of the screw: This phrase is a variation of the idiom 'the tip of the iceberg,' which means the visible part of a larger problem or issue. 'Head of the screw' suggests that something is just the beginning or a small part of a bigger problem
How to use "head of the screw" in a sentence
Basic
Advanced
head of the screw
The head of the screw comprises a recessed socket drive.
Just about the size of the head of the screw.
The head of the screw rests against the foot.
Injection moulding pressures were measured at the head of the screw.
Optionally the head of the screw may be a metal insert.
Place the keyhole opening over the head of the screw.
The head of the screw it.
Preferably the cam surface is defined by the head of the screw.
The head of the screw can be inserted from the bottom.
Use only screwdriver bits that fit properly in the head of the screw.
The head of the screw takes support on the plate of the stave.
Use the proper bit for the head of the screw that you.
The head of the screw was left just above the cartilage surface.
The assembly formed in that way is driven via the head of the screw.
The head of the screw maintains the two plates against one another.
See also
Each recess defines a pocket in which the head of the screw member is seated.
The head of the screw prevents the separation of the two mechanical parts.
This will allow you to bury the head of the screw into the leg.
The head of the screw seats entirely on the shoulder of the metal portion.
The orthopedic screw preferably includes a recess disposed in at least the head of the screw.
The head of the screw element is introduced through the bottom of the housing.
Use the proper bit for the head of the screw that you wish to use.
Push the driver just enough to keep the bit fitting the head of the screw.
By doing so, the head of the screw does not penetrate into the material.
Push the tool just enough to keep the bit fitting the head of the screw.
The head of the screw was provided with a round die of 3 mm in diameter.
The second receiving portion has the bolt head of the screw bolt received therein.
If the head of the screw has a diameter smaller than 9mm, a washer should be used.
This slide cooperates with means for retaining the slide on the head of the screw.
In the latter case, the head of the screw is preferably removed.
Ensure that the Screw Driver is held truly perpendicular to the head of the screw.
The head of the screw bears on the flange 16 of the anchor.
Leave a gap of 5 mm between the head of the screw and the wall.
Tightening the head of the screw 103d eliminates this degree of rotational freedom.
Therefore, there is no risk of cracking the head of the screw around the imprint.
The head of the screw 109 has any appropriate configuration allowing for coupling to a tightening tool.
The implant is a screw comprising a first magnet 26 arranged at the head of the screw.
At a certain moment the head of the screw 13 engages the second flange 5.
Hex-Plus offers a greater contact surface in the head of the screw.
The top head of the screw forms the fixing head 76 for the printed circuit card 36.
Apply a small amount of grease to the screw head of the screw 20.
The head of the screw 19 bears in translation against a second plate 20B.
A flat portion 5 is formed by die-stamping in order to house the head of the screw 3.
FIG . 4 is a front view of the head of the screw along direction F of FIG . 3.
Position the spring ( B ) with its small end against the head of the screw A.
This allows the head of the screw to pull board ( B ) tight against board ( A ).
Place the reinforcement spring “ B ” between the head of the screw and the tab.
Turn the screw ( B ) until the head of the screw.
The threaded shaft is coupled to the head of the screw 122.
The opening 44 has a size larger than the head of the screw 45.
