Examples of 'hexagonal wrench' in a sentence
Meaning of "hexagonal wrench"
hexagonal wrench - A type of tool with a hexagonal-shaped end used for turning bolts, screws, or other threaded fasteners with hexagonal heads. This phrase is often used in mechanical or DIY contexts when specifying the type of wrench needed for a particular task
How to use "hexagonal wrench" in a sentence
Basic
Advanced
hexagonal wrench
Use the auxiliary hexagonal wrench or small.
Securely tighten the fixing screws using the supplied hexagonal wrench.
Take out the hexagonal wrench stored in the battery adaptor.
Carefully store the supplied hexagonal wrench.
Use the supplied hexagonal wrench to tighten screws when fastening wires to the terminal.
Secure them using the enclosed hexagonal wrench.
Use the supplied hexagonal wrench to tighten and loosen the terminal screw of the amplifier.
The jig need not necessarily be a hexagonal wrench.
Use a hexagonal wrench with width across flats of 4.
Tighten the screws with the supplied hexagonal wrench.
Gas stop valve b Closing direction c Hexagonal wrench d Valve lid e Liquid stop valve a c b d d e.
Screw the battery adaptor to the camera adaptor using the hexagonal wrench.
Gas stop valve b Closing direction c Hexagonal wrench d Valve cap e Liquid stop valve.
Remove the washers while holding the screws with the hexagonal wrench.
Gas stop valve b Closing direction c Hexagonal wrench d Valve lid e Liquid stop valve.
See also
The hex . socket hd . bolt should be sufficiently tightened with the hexagonal wrench.
Use the hexagonal wrench supplied to undo the bolt 9.
Each recessed face is aligned with a flat surface of the hexagonal wrench grip.
Figure 3 illustrates a hexagonal wrench locked into the handle.
After five to ten minutes, close the liquid stop valve with a hexagonal wrench.
Figure 14 illustrates a multiple hexagonal wrench holder and slidable lock coupled to the handle.
Tighten the screw with a 4 mm hexagonal wrench.
Turn screw ( 2 ) with hexagonal wrench and observe the behaviour of the ribbon.
Change the direction of badge, and then tighten the screws with a hexagonal wrench.
The placement of a hexagonal wrench 3 into a continuous holding slot 4 is illustrated in Figure 10.
Tighten the screw with a 4 mm hexagonal wrench not supplied.
Use a hexagonal wrench ( 4 mm ) to operate the stop valve rod.
The front roof may be damaged if the L-shaped hexagonal wrench contacts it.
The holder 80 includes multiple spring-urged holders 83, each for holding a different size of hexagonal wrench.
Block the rotation of the shaft by inserting the hexagonal wrench [ 3 ] in the appropriate hole 4.
To remove the badge, loose screws by using a 2 mm hexagonal wrench.
Insert the short end of the L-shaped hexagonal wrench ( Large ) into the motor bracket bolt.
After 5 to 10 minutes, close the liquid stop valve with a hexagonal wrench.
Then, a fixing bolt 41 including a hexagonal wrench hole threadedly engages with the fixing screw hole 12E.
Block the rotation of the shaft with the hexagonal wrench 14.
When removing the Arm Unit, insert the hexagonal wrench in the hole.
Loosen the screws marked on Figure 2 using the hexagonal wrench 10.
In the case of sensor failure or malfunction, use a size 30 hexagonal wrench for replacement operations.
Cover and remove the brush cover . ( 2 ) Use the auxiliary hexagonal wrench or small.
Turn the liquid stop valve 's rod 90 counterclockwise with a hexagonal wrench to open valve.
Turn the liquid stop valve 's rod 90 degrees counterclockwise with a hexagonal wrench to open the valve.
You'll also be interested in:
Examples of using Hexagonal
Show more
Tighten the hexagonal screws using the
Hexagonal spindle for direct power transmission
Then tighten the hexagonal bolt slightly
Examples of using Wrench
Show more
Blade wrench is stored in the switch handle
The day threw a wrench in our plans
Hex wrench for loosening control knobs
