Examples of 'hole positions' in a sentence
Meaning of "hole positions"
Hole positions typically refer to the locations or placements of holes in various contexts, such as in golf courses, construction sites, or board games. It determines the specific spots where holes are intended to be or where objects are meant to be inserted or fitted
How to use "hole positions" in a sentence
Basic
Advanced
hole positions
Mounting hole positions are indicated by the arrows.
Automatically detect contours and hole positions.
To check hole positions on a circular pattern.
Level and mark hole positions.
Adjust the hole positions by turning the gear as illustrated.
Mark through the hole positions.
Determine hole positions according to the diagram detailed in the figure above.
Another difference is that the hole positions are different.
Other hole positions may be used for indicating variations in practising the present invention.
Dimensions of the hole positions on the wall.
Of seat angle can be set by lowering the rear post two hole positions.
There are three hole positions shown for the wall bracket.
Please refer to the diagram below for the mounting screw hole positions.
Line up the legs with the hole positions of the grate.
Place the cowl over the fuselage nose and transfer the hole positions.
See also
In one embodiment four hole positions are used to indicate the cartridge contents.
Position the wallplate against the wall and mark hole positions with a pencil.
Drill holes on wall at hole positions marked no accessories provided with this template.
Wall mounting instructions Drill holes on wall at hole positions marked.
The template size and screw hole positions are identicalto the top of the unit.
Place the Docking Station back plate into the desired location and mark the hole positions.
Mark screw hole positions and drill two holes into the wall at these locations.
Position base on wall, level and mark hole positions.
Note the specific hole positions of the actuator extension tube and the gas spring.
Bowling balls vary in size, weight and finger hole positions.
Locate the marked hole positions in the centre rib and drill them 4 mm Ø.
Position wallplate on wall, level and mark hole positions with pencil.
Hole positions are different between supports 1 and 2.
If B or C are to be used, the hole positions need to be modified.
The plural hole positions can be separately input by designating hole numbers with a button 411a.
Step 4 - Inserting 4 points for mounting hole positions.
EPMATHMARKEREP The designated hole positions are also corrected by using Equation 5.
Figures 11A-11F of the accompanying drawings show alternative funnel hole positions.
Use a pen to mark the bore hole positions ( a ) of the wall mount on the wall.
Using the system 10, blast hole positions can be identified uniquely and quickly to eliminate errors.
You'll also be interested in:
Examples of using Hole
Show more
So does that giant hole in the wall there
The hole of the steam spout is clogged
Cut the piping hole sloped slightly
Examples of using Positions
Show more
If at all fixed positions of the movable components
Positions are given in degrees and fractional degrees
Margins on correlated positions address this fact
