Examples of 'hose connection' in a sentence
Meaning of "hose connection"
A hose connection is a fitting or attachment that allows for the connection of hoses, pipes, or tubing to facilitate the flow of liquids or gases. It is primarily used in plumbing, firefighting, gardening, and other applications where fluid transfer is necessary
How to use "hose connection" in a sentence
Basic
Advanced
hose connection
Check steam hose connection on top of canister.
The dehumidifier is fitted with a hose connection.
Fill hose connection is loose at faucet or washer.
Hose to connector or hose connection may be loose.
Hose connection should be made in a safe manner.
Check the water drain hose connection.
Check the hose connection for leaks.
A collection bag arrangement comprising a hose connection.
Solution hose connection not fully engaged.
Check the inlet hose connection.
Vacuum hose connection on squeegee mount is loose.
Press the button on the hose connection to detach.
Ensure hose connection to pump is in good condition.
Plug a hose onto each hose connection socket.
Drain hose connection may be loose.
See also
Flexible use with various hose connection options.
Flexible hose connection specific types only.
The tanks should have a garden hose connection.
The drain hose connection is not correct.
Possible hose to tool and hose to hose connection failure.
Realign hose connection or replace pump.
Facilitates alternative hose connection.
Hose connection for vacuuming in containers.
High pressure hose connection spray gun side.
Hose connection between compressor and air tool leaky.
Drain cock with hose connection and cap.
The boiler drain is going to have male garden hose connection.
Replacing any hose connection except hydraulic connections.
Recommended to have one whip check for each hose connection.
Examine hose connection to gun and make sure it is secure.
Push the hose coupling in to the hose connection until it locks.
Intake flex hose connection with internal metal coupling.
Make sure the spring is inside the hose connection fitting.
Check pressure hose connection from tub to pressure sensor.
Until it is seated firmly or place it onto the hose connection piece.
Check the hose connection and make sure it is tight.
This should be fi tted in the same way as the hose connection.
Gas supply hose connection to side burner valve assembly.
The cuff is not correctly seated or the hose connection is not sealed.
Also use of hose connection compared to pipe connection is studied.
The cuff is not correctly seated or the hose connection is not tight.
Fit each hose connection with a stainless steel hose clamp.
Insert the vacuum hose to the stop in the hose connection socket.
The hose connection is intended for use on the upper inlets.
Steam comes out at the hose connection on the steamer.
The hose connection must be plugged fully within the hose receptacle.
Threaded hose connection.
Make sure the locking pin on the flap is inserted in the hose connection.
Connect the charge hose connection to the vacuum pump.
It is particularly important to check the tank and hose connection for leaks.
You'll also be interested in:
Examples of using Hose
Show more
Store chemical hose so it is protected from damage
Hose nozzle air suction regulator is open
Disconnect hose from used water tank
Examples of using Connection
Show more
Loose gun connection or faulty gun assembly
Only for appliances with a water connection
Expenses in connection with pregnancy and childbirth
