Examples of 'hose connector' in a sentence
Meaning of "hose connector"
A hose connector is a device or fitting used to connect or join two sections of a hose together. It provides a secure and leak-proof connection, allowing for the flow of fluids or gases through the hose system. Hose connectors come in various shapes, sizes, and materials to accommodate different types of hoses and applications. They are commonly used in plumbing, gardening, irrigation, and industrial settings
How to use "hose connector" in a sentence
Basic
Advanced
hose connector
Remove hose connector from flushing attachment.
Air leak at suction hose connector.
Cut hose connector to fit if needed.
Replace screen and garden hose connector immediately.
The hose connector allows the hose to swivel.
Screw the internal hose connector back in place.
The drain fitting uses a standard garden hose connector.
Use a rubber hose connector with spring or screw.
Attach a garden hose to drain hose connector of the.
A vacuum hose connector configured to couple to a vacuum hose.
Insert hose into hose connector.
Insert the hose connector into the suction inlet.
Air is in getting in through a hose connector.
Gently pull up on hose connector until hose releases.
The sump pump has a garden hose connector.
See also
Use a rubber hose connector with spring or screwtype clamps.
Push the selected tool into the hose connector.
Act on the flexible hose connector fitting as illustra.
Refit the filter and tighten the hose connector.
Attach this hose connector to any common garden hose.
Remove the two screws holding the hose connector.
Use the hose connector to connect an external dust scrubber.
Connect a garden hose to the threaded drain hose connector.
Screw the hose connector onto water supply tap.
Drain water from the hoses through the hose connector.
Rotate the hose connector in the direction marked with an arrow.
Drill out only the center of the drain hose connector.
Push the hose connector into the opening on the vacuum.
Remove the drain hose from the hose connector using pliers.
Push the hose connector onto the mouth of the tap.
According to an alternatively preferred embodiment the sealing sleeve is preassembled on a hose connector.
Plastic hose connector.
The hose connector and the cleaning unit may be integrally or individually formed.
Insert the end of the drain hose connector into the standpipe.
Attach the hose connector to the suction hose opening on the appliance.
Connect the plastic hose to the hose connector on the back of the unit.
The vacuum hose connector is on the center right hand rear of the machine.
Recommendation for the use of the stepped hose adapter and hose connector.
Screw the threaded hose connector on the end of the threaded tube.
Install the plastic hose with exhaust nozzle and hose connector on both sides.
Ensure end hose connector is plugged into hose port behind unit.
Connect open end of discharge hose to vacuum intake hose connector and turn on machine.
Connect the hose connector of vacuum cleaner to the dust pipe joint.
A disposable hose also may connector the hose connector and the mixing área.
Snap in the hose connector adaptor by sliding spring into nozzle slot.
Position the wire clip between the two positioning ribs on the drain hose connector.
Line up the hose connector tabs with the slots in the inlet.
Install the plastic hose with window bracket adapter and hose connector on both sides.
Line up the hose connector above the tabs on the exhaust outlet.
Hold down the plate and connect the inlet hose connector to the tap connector.
You'll also be interested in:
Examples of using Hose
Show more
Store chemical hose so it is protected from damage
Hose nozzle air suction regulator is open
Disconnect hose from used water tank
Examples of using Connector
Show more
Only the appropriate connector must be used
Purple connector for black whip antenna
Plug the charger connector into the
