Examples of 'hose end' in a sentence
Meaning of "hose end"
hose end - refers to the nozzle or connection point at the end of a hose, typically used for watering plants or cleaning purposes
How to use "hose end" in a sentence
Basic
Advanced
hose end
Hose end not secure in tool rack.
Insert machine hose end into inlet.
Push tools firmly into hose end.
Inspect hose end and clear any obstructions.
Install hose guide on hose end if equipped.
Drain hose end could reach into water.
Insert the siphon rigid hose end into.
Turn hose end until it is pointing towards bottom of tank.
Connect the charge hose end described in the.
Align electrical connections on hose end to.
Insert machine hose end into inlet of tank.
Place the metal clamp on the hose end.
Insert the flexible hose end into inlet of tank.
Place hose clamp over drain hose end.
Look into hose end and remove any blockage.
See also
Securing assembly for screwed hose end connectors.
Twist the hose end slightly to tighten the connection.
Do not put the drain hose end into water.
Remove hose end from side of unit and hose caddy.
Open clamp with pliers and slide onto hose end.
Do not point the hose end at other persons or animals.
Check that seal is in place inside the hose end cap.
Insert flexible hose end into air intake duct.
Insert the desired tool firmly into the hose end.
Do not put the drain hose end in a drainage ditch.
Insert hose end into right side of vacuums lower air path.
A retainer serves to fasten the hose end to the tube end.
Insert machine hose end into blower port on rear of unit.
Use the drain hose bracket to keep drain hose end retained.
Do not put the drain hose end into water or drainage.
Simply push the attachment firmly on the end of the wand or hose end.
Grasp upper hose end and twist elbow counterclockwise to remove.
This amount of compression is sufficient to keep the hose end firmly clamped.
Insert hose end into foot and push into place.
The fitting includes a collar having threads thereon threadable to a convoluted hose end.
Be sure the garden hose end has a rubber washer to minimize.
Make sure to position the pressure relief valve hose end in the drain pan.
Insert the curved hose end in the opening of the vacuum.
Clip hose bracket into front of machine and slide hose end into the inlet.
Install the large hose end and rotate clockwise to lock in place.
You can store the wands and remaining tool on the hose end while hanging.
Ensure that the hose end is properly placed in the vacuum inlet.
Turn cleaner ON and check hose end for suction.
Firmly push hose end over the open end of the upper wand.
All other inlets operate automatically when hose end is inserted into inlet valve.
Seat the drain hose end against the hose stops on the pump outlet.
Use only the correct type and size of hose end fittings and connections.
Insert machine hose end with locking nut into inlet of tank and tighten.
Ensure that the lose disc falls right below on the hose end Picture B.
Place the hose end near the floor drain and remowe the plug.
You'll also be interested in:
Examples of using Hose
Show more
Store chemical hose so it is protected from damage
Hose nozzle air suction regulator is open
Disconnect hose from used water tank
Examples of using End
Show more
End poverty in all its forms everywhere
This could be the end of a beautiful friendship
End this before people get hurt
