Examples of 'hoses must' in a sentence
Meaning of "hoses must"
hoses must: This phrase implies a requirement or necessity for hoses to be used in a specific manner or for a particular purpose
How to use "hoses must" in a sentence
Basic
Advanced
hoses must
Worn or damaged hoses must be replaced immediately.
Pressure control devices and hoses must.
These hoses must be checked regularly for brittleness.
Any existing cables or hoses must not be reused.
Both hoses must be connected for washer to work properly.
The high pressure hoses must not be removed.
Water hoses must be as short as possible and free of kinks.
Any sagging or kinking of the hoses must be avoided.
Damaged hoses must be repaired or replaced.
For safety reasons these hoses must not.
All connecting hoses must have properly sealed.
Only original replacement parts and hoses must be used.
Her hoses must be hemorrhaging.
There are operation situations at which the hoses must be renewed yearly.
Two hoses must be connected to the reject water outlet.
See also
The well, pump and the hoses must not contain any water.
The hoses must be checked everytime if they are still elastic.
The water supply and draining hoses must be securely fastened and remain undamaged.
The hoses must be replaced in rotation after a maximum of five years.
A valid inspection certificate for the loading / unloading hoses must be available on board.
Both hoses must be used for the washer to work properly.
Damaged tyres, suspension air bags and pressure hoses must be replaced with new ones.
The fuel hoses must fit tightly on the fuel filter.
The maximum length of the combined hoses must not be longer than 3.2 m.
Used hoses must not be used anymore and should be discarded.
Replacement LP pressure regulators and hoses must be obtained from Weber-Stephen Products LLC.
Both hoses must be attached and have water flowing to inlet valves.
The Rules include, All hoses must now have a trigger nozzle.
The hoses must be routed without kinking and preferably uphill to ensure perfect bleeding.
To maintain the category, the hoses must be made in factory, and crimp panels too.
The hoses must be installed without kinks and ( to ensure perfect bleeding ) rising if possible.
Welding hoses Both welding hoses must be of same type e.g. 2xMIG Manager hoses.
D Hoses must be checked initially after five years ' use, and then every two years.
High-pressure water mist hoses must satisfy the requirements of the pipes.
Fluid hoses must have spring guards on both ends to prevent kinks and rupture.
No, I meant the car . Her hoses must be haemorrhaging.
Towels and hoses must be replaced at regular intervals and freed from salt residues.
No, I meant the car . Her hoses must be hemorrhaging.
Hot-water hoses must be reinforced to withstand high temperatures.
Pressure washers and hoses must not be used to wash the outside of the machine.
Brake hoses must be undamaged, properly attached, without leaks, and appropriately flexible.
Pumps and hoses must be ULC approved.
Both hoses must be attached and have water " owing to the inlet valve.
As already mentioned, flexible hoses must be slidable within the machines whereon they are used.
The supply hoses must resist 150 % of the max pressure deliverable by the compressed air source.
All containers, valves, pipes and hoses must be regularly examined to evaluate their general condition.
The overflow hoses must always run downwards over their entire length.
The Rules are: All hoses must now have a trigger nozzle.
The lines and hoses must have adequate support and secure clamps.
Flexible hydraulic hoses must be clearly identifiable and indelibly marked with the following information.
