Examples of 'hoses should' in a sentence
Meaning of "hoses should"
hoses should: This phrase may refer to the correct type or quality of hoses that are necessary for a particular task or situation. It could also be a statement indicating a suggested action regarding hoses
How to use "hoses should" in a sentence
Basic
Advanced
hoses should
The hoses should be connected and properly tightened.
The length of the cables and hoses should be kept as short as possible.
Hoses should be replaced when they become damaged.
Flexible hoses should be.
Hoses should be replaced approximately every three years.
Dimensional changes in pipes and between pipes and hoses should be avoided.
Steam hoses should be as short as possible.
Clean, dry and heat resistant hoses should be used.
Hoses should only be bought from certified gas dealers.
When servicing the hydraulic system, the hydraulic hoses should be disconnected.
Our hoses should be like.
Hoses should not have been crossing the street.
While running or installing, the hoses should not be blocked by curtains or other objects.
Hoses should not have been crossing the street or the street should have been secured.
The straight end of these hoses should be connected to the supply fig . 1.
See also
Air hoses should be able to sustain a working pressure of at least 10 Bar.
Laying and connecting of hoses should be conducted only when the water supply is off.
The hoses should be firm, yet pliable when you squeeze them.
All units, couplers and hoses should conform to the product specifications in terms.
Washer hoses should be replaced every 3 to 5 years as part of regular household maintenance.
High pressure hoses should be inspected daily for signs of wear.
Flexible hoses should be used to connect screen enclosures to the extraction system.
Compressed air hoses should be renewed after no more than 6 years.
Water hoses should be drained, coiled and hung off of the floor.
Under-buoy hoses should have electrical discontinuity.
The two hoses should have the same temperature.
All hoses should be replaced.
The plastic hoses should have a simple pathway risk of buckling.
In most cases, hoses should cross when attached to correct water temperature faucet.
Note that the hoses should be pushed approx . 20 mm into the hose fittings.
Hose System Hoses should be installed with a constant incline resp . constant decline of 5-10.
You'll also be interested in:
Examples of using Hoses
Show more
Disconnect hoses from used water tank
Water faucets beyond reach of fill hoses
Use hoses that are no longer than necessary
