Examples of 'idler roller' in a sentence
Meaning of "idler roller"
This phrase refers to a type of roller that is used to guide or support a moving belt or conveyor system. It is often used in industrial or mechanical applications, where a roller is needed to help facilitate smooth movement or rotation of a belt or other moving parts
How to use "idler roller" in a sentence
Basic
Advanced
idler roller
The idler roller has a known diameter.
One of the rollers is driven by a motor and the other is an idler roller.
An idler roller may be soft foam rollers or paper feed rollers.
This wetted fibrous web then was wrapped around a large rotating idler roller.
At least one idler roller configured and arranged to apply tension to the belt.
The hinged joint allows a belt to articulate about a drive sprocket or idler roller.
A front idler roller is used for mounting the front end of the track.
A flat spring coil is preferably compressed between the friction drive roller and an idler roller.
Thus, each idler roller serves as a guide for a corresponding belt.
Advantageously, the compression member comprises an idler roller.
The first opposing idler roller 58 may be adjustable in the vertical direction of FIG.
To be certain that the spacer is not damaged, grasp the idler roller.
The idler roller arm is pivotably attached at 26.
Belt conveyors 54 could be replaced by idler roller conveyors as well.
Below this an idler roller 9 is located opposed to the driving roller 8.
See also
The manufacturing device according to claim 16, wherein the compression member comprises an idler roller.
Idler roller 803 also preferably is a stainless steel cylinder that utilizes bearings.
The web is then conveyed to third idler roller 76 mounted upright on upper tape applicator 40.
Immediately below the cutting blade, the shingle is supported by slotted split cylindrical idler roller 33.
Both the drive roller 24 and the idler roller 18 have suitable rubber or similar friction coatings.
In Figures 9 and 10 there is shown part of a pump housing and an idler roller.
Package, One powered roller, one idler roller and Electric Control System.
Roller 27 is merely used as a guide, it is an idler roller.
The label material goes past the idler roller 15 driven by a drive roller 16.
The base roller 344 also can be an idler roller.
Engaging said idler roller with said pipe element ( 40 ) within said groove ;.
The other roller 22 is an idler roller.
The tracks mount over a front idler roller ( not shown ), and a rear idler roller 42.
As mentioned above, in one embodiment, the laminating roller 160 is an idler roller.
The acceleration roller 52 forms a nip with acceleration idler roller 54 mounted upon acceleration idler shaft 58.
Services - Roll concept - Tailor-made and in-house manufacture Idler roller.
Another arrangement, of idler roller 17 a is shown in Figure 3.
Also included within the belt-tensioning device is a stationary idler roller 147.
Additionally, there is a card stack support idler roller 70 that is mounted on a shaft 70A.
The belt 18 is supported along a path of conveyance 48 by idler roller assemblies 28 and drums.
You'll also be interested in:
Examples of using Idler
Show more
Pulley and idler not in correct adjustment
Belt must be in groove on top of idler pulley
Remove idler plates from scrub head
Examples of using Roller
Show more
Remove the roller brush halves and re
You can count this high roller in
Turn roller adjustment screw to lower door
