Examples of 'inlet air temperature' in a sentence
Meaning of "inlet air temperature"
inlet air temperature - Referring to the temperature of the air entering a system or engine, often used in the context of HVAC systems, combustion engines, or industrial processes. Monitoring and controlling the inlet air temperature is essential for efficient operation and performance of these systems
How to use "inlet air temperature" in a sentence
Basic
Advanced
inlet air temperature
The inlet air temperature was not heated.
Installation and connection of the inlet air temperature sensor.
Inlet air temperature is too damp.
System for reducing inlet air temperature of a device.
Inlet air temperature is too warm.
This sensor serves for both inlet air temperature control as well as antifreeze protection.
Inlet air temperature is expressed in either degrees Fahrenheit or degrees Celsius.
This is dependent upon inlet air temperature versus SET POINT temperature.
On termination of spraying, drying was carried out at the same inlet air temperature.
Engine inlet air temperature.
Other parameters include the atomizing air and volume, spray rate and inlet air temperature.
Motor inlet air temperature.
The pellets were dried in a fluid bed drier at a inlet air temperature of 60 °C.
Unit inlet air temperature.
Then the drying process was continued with an inlet air temperature of about 80°C.
See also
The inlet air temperature is automatically controlled and continuous.
Means for sensing ambient inlet air temperature to the alternator ;.
The inlet air temperature is low then the genset has difficulty in starting.
After the spraying the granulate is dried with an inlet air temperature being 75°C.
Stop fan when inlet air temperature equals set point.
The wet granulation is dried in a fluid bed dryer, using an inlet air temperature of 50 °C.
The inlet air temperature is low and the genset has difficulty in starting.
The blower remains switched on until the inlet air temperature drops below 45 C.
The inlet air temperature is low and the engine has difficulty in starting.
So, I can have volts, air fuel ratio . or inlet air temperature.
The inlet air temperature represents air curtains and food exit air temperature.
The wetted mixture was dried in a fluid-bed dryer using an inlet air temperature of 70°C.
When the inlet air temperature rises, the water pump starts functioning normally.
A system for reducing inlet air temperature of a device, comprising,.
Inlet air temperature for the fluidization air was maintained at approximately 40 ° C throughout the granulation process.
After adequate mixing, the inlet air temperature is increased until the HCO flakes melt.
Inlet air temperature °C.
The fluid bed inlet air temperature is maintained at about 125°C.
The inlet air temperature is maintained at 85C.
The inlet air temperature was kept at approximately 43°C.
The inlet air temperature of the fluid bed was 60 °C.
The inlet air temperature was slightly heated to 25°C.
The inlet air temperature is maintained at 80°C and the dewpoint is set at 9°C.
The desired inlet air temperature during granulation phase was 40°C and during drying phase 60°C.
You'll also be interested in:
Examples of using Temperature
Show more
Manufacturer of the separate temperature measuring equipment
Actual temperature below low temperature value
Select the desired temperature with and
Examples of using Inlet
Show more
Attach inlet and discharge hoses to pump
Check and clean inlet hose screen
Place inlet hoses inside washer basket
Examples of using Air
Show more
Air sealed in hydraulic system while operating
Application of the air limited quantities mark
The air will be full of jets in a minute
