Examples of 'inlet and exhaust' in a sentence
Meaning of "inlet and exhaust"
inlet and exhaust: A phrase commonly used in the context of engines or machinery to refer to the intake and outflow of gases or fluids
How to use "inlet and exhaust" in a sentence
Basic
Advanced
inlet and exhaust
Air inlet and exhaust duct installation.
Remove any blockages observed in inlet and exhaust ducts.
Side inlet and exhaust ports.
Do not push any objects in the air inlet and exhaust grilles.
Start the inlet and exhaust air blowers.
The secondary piston has now partially covered both the inlet and exhaust apertures.
Air inlet and exhaust flow principle in ashing furnaces.
Length of the combustion air inlet and exhaust lines in total.
Inlet and exhaust valves modified to operate continuously in heavy duty applications.
Always keep the air inlet and exhaust tube clean.
Inlet and exhaust grilles and impeller can be vacuum cleaned or wiped using a dry cloth.
Stop the pan and turn off the inlet and exhaust blowers.
Keep the air inlet and exhaust gas outlet free of obstructions.
The command means can include means for evaluating the engine inlet and exhaust pressures.
Machining of inlet and exhaust regions can be easily matched to avoid overlapping paths.
See also
The Antarès had a single pair of overhead inlet and exhaust valves per cylinder.
There are separate inlet and exhaust manifolds on the offside ( left ) with a hotspot.
Minimum cross-section of the inlet and exhaust ports.
Inlet and exhaust valves, with a head diameter not exceeding 80 mm.
Make sure that the air inlet and exhaust ports are free from obstruction.
Randomness is imparted, as previously described, by the inlet and exhaust port timing.
Make sure that the air inlet and exhaust ports are free from obstructions.
In more sophisticated systems, disconnection is achieved by connecting up the compressor inlet and exhaust.
As well, install inlet and exhaust plugs.
The course has a focus on engine components, including air inlet and exhaust parts.
In this process, the inlet and exhaust doors are still closed.
The engine was a vertical one with horizontal, opposed poppet valves for inlet and exhaust.
The angle between the inlet and exhaust lobe, measure in degrees.
To this end, the engine may conveniently operate with piston control inlet and exhaust ports.
This class also includes, • manufacture of inlet and exhaust valves of internal combustion engines.
Inlet and exhaust valves 24 deliver air and exhaust gases in and out of cylinder 16.
Minimum cross-section of inlet and exhaust pipes.
Connecting rods, inlet and exhaust manifolds;.
Figure 8 ( A ) illustrates the cylinder in the combustion phase, with the inlet and exhaust valves closed.
In other embodiments, separate inlet and exhaust gas lines are provided ( not shown ).
Cages should have HEPA-filtered inlet and exhaust air.
All K series are non-crossflow engines - the inlet and exhaust manifolds are on the same side.
You'll also be interested in:
Examples of using Inlet
Show more
Attach inlet and discharge hoses to pump
Check and clean inlet hose screen
Place inlet hoses inside washer basket
Examples of using Exhaust
Show more
Against exhaust noise and head protection
Mass flow rate of the exhaust gas
External exhaust elbow requires additional space
