Examples of 'inlet connector' in a sentence
Meaning of "inlet connector"
inlet connector: A device or component that connects an inlet, such as a pipe or cable, allowing the flow of something into a system or device
How to use "inlet connector" in a sentence
Basic
Advanced
inlet connector
The elongated passageway has an air inlet connector.
Pump from the inlet connector to the boiler and.
Place plastic cover over brass fitting on inlet connector.
Either the power inlet connector on the rear of the appara.
Connect the fluid supply hose to fluid inlet connector.
Either the power inlet connector on the rear of the apparatus.
Screw off the drain valve on water inlet connector.
Screw the water inlet connector onto the water inlet.
That energy is then transmitted to the audio equipment via its AC inlet connector.
Analyser inlet connector.
Attach the gravity cup to the fluid inlet connector 6.
The housing is provided with an inlet connector 39 for coupling to a supply of untreated water.
Attach the cup lid assembly to the fluid inlet connector 6.
A gas inlet connector connectable to at least one gas source comprising a respective gas ;.
Check the filter inside the water inlet connector is clear of debris or.
See also
The inlet connector can be configured to swivel coaxially with the air supply hose 30.
Please be sure to plug the cordset into the inlet connector before the next step.
Cable inlet connector connected to the inlet cable bundle and secured to the casing ; and.
The tube is connected to a hydraulic inlet connector of the high-pressure pump.
The pressure inlet connector 1 is therefore disconnected from the braking members connected to the connectors 2.
The tube is connected to a hydraulic inlet connector of the low-pressure pump.
Chiller inlet connects to laser outlet connector. Chiller outlet connects to laser inlet connector.
Keep plastic cover caps attached to inlet connector and hose / regulator assembly for storage.
It is shown that fluids enter refill valves through inlet connector 11.
Connect hose to inlet connector see Figure 3.
A sensor device 5 is coupled to the outlet connector 4 vía an inlet connector 6 thereof.
Inlet circuit 4 comprises an inlet connector 41 allowing the connection of hammer 2 to a compressed air circuit.
Place plastic cover caps over the brass fittings on the inlet connector and hose / regulator assembly.
The regulator inlet connector mates with the cylinder valve outlet properly, safely and firmly, and ;.
Place plastic cover caps over brass fittings on inlet connector and hose / regulator assembly.
The power switch is located in the rear alongside the IEC 320 power cord inlet connector.
The output of this latter leads to an inlet connector 11 of the module 1.
The fuel inlet connector ( B ) is shown for reference.
For example, the mains water supply can be connected to the inlet connector 3.
Fig . 2 is a cross-sectional view of an inlet connector included in the set of tubes.
Expose the strainer 16 in the machine water inlet connection by removing the inlet connector 10.
The gas flow that enters through the inlet connector 208 will typically have a non-uniform velocity profile.
A largest side of this triangle faces the inlet connector 208.
Screw inlet connector 12 onto machine water inlet connection 16.
The first manifold tank 12 is provided with an inlet connector 24 for the flow of coolant.
Inlet connector 14 is in fluid communication with picowell-array 18 through a fluid passage.
The casing also has an inlet connector 11 secured to the casing 1.
The inlet connector 6, however, communicates permanently with the high-speed manifold 4.
The situation is the same for inlet connector 54 and its conduit ( not shown ).
Rotation of the fixing plate 254 is prevented by interference of the first inlet connector 228.
In particular, a main inlet connector 11 and an opposite main outlet connector 12 are present.
Obviously, the butterfly valve 7 controls the air-flow from the inlet connector 6 to the high-speed manifold 5.
A fluid inlet connector 206 secured in the desired location on the periphery of the central aperture 208.
Remove the cap from the G3/4 ” on the coil inlet connector of the boiler.
The fuel inlet connector ( A ) and electrical inlet ( B ) is shown below.
You'll also be interested in:
Examples of using Connector
Show more
Only the appropriate connector must be used
Purple connector for black whip antenna
Plug the charger connector into the
Examples of using Inlet
Show more
Attach inlet and discharge hoses to pump
Check and clean inlet hose screen
Place inlet hoses inside washer basket
