Examples of 'inlet tube' in a sentence
Meaning of "inlet tube"
inlet tube - refers to a pipe or conduit that allows fluid or air to enter a system or device
How to use "inlet tube" in a sentence
Basic
Advanced
inlet tube
Plug orange inlet tube to the main device.
Uniform bladder with single air inlet tube.
The inlet tube is disposed in a central axial position.
A second vaporizer unit is connected to the inlet tube.
Each inlet tube is threaded vertically through an inside wall.
Connect the supply water to the filter inlet tube.
Shorten the wall inlet tube to prevent this condition.
A second check valve is coupled to the air inlet tube.
The inlet tube suitably has a tubular exterior design.
A valve was employed to close off the venting inlet tube.
Replace the air inlet tube and secure the clamp.
Inlet tube assembly.
Air was bubbled through the inlet tube at the bottom.
The inlet tube is in fluid communication with a catheter of a catheterized patient.
Tangential inlet tube.
See also
The inlet tube to the mass spectrometer becomes the ion source.
The latter is arranged within the primary air inlet tube.
An inlet tube is operatively connected for delivering fluid to the cuff portion.
There may be more than one inlet tube inserted in the housing.
The top cover is set on an upper end on the water inlet tube.
These two jackets envelop the inlet tube for the secondary sodium.
The inlet tube is connected to source of divided matter which is not shown herein.
The outlet tube plate may be structurally similar to the inlet tube plate.
Disconnect the water inlet tube from the float valve at the compression fitting.
A refrigerant pipe may be connected to said compression element through the inlet tube.
A seal is applied horizontally below the inlet tube after filling of the bag.
The pump may also be located within or at the end of the inlet tube.
Connect the vacuum hose to the vacuum inlet tube located at the rear of machine.
Atmospheric pressure on the resin pushes resin into the bag through an inlet tube.
Disconnect squeegee hose from inlet tube and replace with accessory vacuum hose.
The most severe conditions among these are concentrated around the inlet tube holes.
Remove clamps and inlet tube from drain pump to check for and remove debris.
Specify a burnished valve and seat and an extended inlet tube and check valve.
Within the primary air inlet tube is a second associated primary air flow control valve.
Chamber having a hot zone and a cold zone and at least one gas inlet tube.
That return sleeve extends around the inlet tube inside the peripheral skirt of the pusher.
The peripheral side skirt of the pusher extends in variable manner around the inlet tube.
Advantageously, the inlet tube is brazed to the tangs.
The casing comprises a perforated cover plate at the top side and laterally an inlet tube.
The outer diameter of the inlet tube is for instance about 2 mm.
The feed passes the catalyst bed in a transverse direction from inlet tube to outlet tube.
The inlet tube 6 is made of iron and is plated with copper.
The latter form together a conical envelope which becomes a narrower towards the primary air inlet tube.
Liquid inlet tube with controlled ground / earthing connection or switch.
In an embodiment of the invention, the inlet opening collar is an inlet tube.
The inlet tube 6 thus secured is connected to the aforementioned refrigerant pipe 7.
At the top, the shank is connected to an inlet tube vía a freely rotatable coupling.
The end of the inlet tube 2 is sharpened to assist clean penetration of the foil.
In this embodiment, the fixture also holds the whole blood inlet tube.
Check that reservoir, filter and inlet tube are free of sludge and debris.
