Examples of 'inlet gas' in a sentence
Meaning of "inlet gas"
Inlet gas refers to the gas that enters or flows into a particular system or component. It is commonly used in engineering and technology, especially in the context of fluid mechanics and energy systems. Inlet gas can pertain to various substances, such as air, fuel, or exhaust gases, depending on the specific application
How to use "inlet gas" in a sentence
Basic
Advanced
inlet gas
Range of inlet gas and air pressure.
The reaction is controlled by the inlet gas temperature.
Inlet gas pressure is too low.
All temperatures given refer to inlet gas temperatures.
Incorrect inlet gas pressure or inlet regulator is damaged.
Hot water outlet cold water inlet gas inlet.
Inlet gas pressure shall be as specified by the manufacturer.
The heat transferred to the inlet gas is provided by mechanical energy of a rotary compressor.
The recycle gas can also be referred to as the inlet gas or cycle gas.
Check inlet gas pressure or replace inlet gas regulator.
The most severe conditions are related to inlet gas tube to tube sheet joins.
The inlet gas pressure is slightly above atmospheric pressure.
Isoprene is volatile and can be efficiently swept from the tank by the inlet gas.
Gas inlet gas supply.
The gas velocity varies approximately as the square root of the inlet gas temperature.
See also
The inlet gas pressure must be within the range specified.
Drying gas movement and temperature of the inlet gas influence the type of final product.
The inlet gas temperature is usually governed by the cooling water temperature.
The outlet gas temperature was controlled by varying the inlet gas temperature and feed rate.
The optional inlet gas flow distribution system may be designed differently.
Examples 1 to 5 show the effect of the variation in temperature of the inlet gas jet.
The minimum inlet gas supply pressures is for the purpose of input adjustment.
The oxygen content and / or the temperature of the inlet gas could be modified.
The minimum inlet gas supply pressure for the purpose of input adjustment.
For example, when one bed is taken offline it contains a quantity of inlet gas.
This flow of inlet gas and liquid in the opposite direction is called countercurrentflow.
The reaction gases were than added to the inlet gas stream in the following amounts,.
Increasing the inlet gas temperature decreases its density and increases its velocity.
Also provided is a restrictor 118 effective to restrict the inlet gas supply.
Bypassing of the inlet gas flow will result in higher combustion gas temperatures.
Baffles 46 assure a relatively uniform distribution of inlet gas into outer annular feed channel 20.
The inlet gas to the caustic scrubber contains reactive oxygenates like aldehydes and ketones.
In other embodiments, the inlet gas stream is substantially dry.
Inlet gas flows were regulated by mass flow controllers ; liquids were fed using a pump.
Means for providing an inlet gas flow at the inlet of said vessel ;.
Inlet gas flows into bed 6 through inlet 5 and product gas flows out through an outlet 8.
In addition, the preheated inlet gas is mixed with fresh gas for temperature control.
In a state that the valve 10 is opened, the inlet gas valve 1 is opened.
O2 from the inlet gas will cause degradation as well.
P absolute pressure of inlet gas ( pascal ).
At lower inlet gas flow rates, the adsorption interval is lengthened.
The absorption solution removed 99.5 % of the sulfur dioxide in the inlet gas.
The maximum inlet gas pressure for this outdoor firepit is 11 inches of water column.
The line 13 includes a pressure sensor 17 for monitoring the inlet gas pressure to the carbonator tank 5.
One measures the inlet gas temperature, the other the outlet gas temperature.
In both cases, LPG ( cooking gas ) was used as an inlet gas.
The maximum inlet gas pressure for this outdoor appliance is 14 inches of water column pressure.
Examples 13 and 14 demonstrate the consequences of the presence of NO2 in the inlet gas.
The maximum inlet gas pressure for this outdoor fire table is 14 inches of water column.
In these embodiments, the H2O/C ratio in the inlet gas stream is preferably from 1 to 5.
