Examples of 'input of amplifier' in a sentence
Meaning of "input of amplifier"
input of amplifier: This phrase pertains to the signal or audio input that is connected to an amplifier, which amplifies the signal strength or power for output through speakers or other devices
How to use "input of amplifier" in a sentence
Basic
Advanced
input of amplifier
Connect stereo directly to input of amplifier.
The inverting input of amplifier 9 is connected directly to the negative terminal -.
A reference voltage Vref is supplied to a positive input of amplifier 3.
The positive input of amplifier 10 is connected to ground.
The input signal Vin of the chain is provided at the noninverting input of amplifier 10.
As a result, the voltage applied to the input of amplifier A4 increases more slowly than Vi.
A second input of amplifier 13 is preferably connected to an earth terminal.
The voltage source Vref is connected between the inverting input of amplifier 55 and voltage Vcc.
The commutating input of amplifier 70 is connected to the ground.
Has a drain that is connected to the inverting input of amplifier 311 resp.
The first input of amplifier 45 may be the negative input.
Substantially zero volts is then applied to the inverting input of amplifier 48 through resistor 52.
This second input of amplifier 45 may be the positive input.
A reference voltage Vref is supplied to a second input of amplifier 17.
The non-inverting input of amplifier 166 is connected to the coarse calibration adjustment circuitry.
See also
An analog input signal Ve is sent to a non-inverting input of amplifier 1.
The non-inverting input of amplifier 202 is connected to the display calibration adjustment circuitry.
The output of circuit 29 is connected through a resistance R to the negative input of amplifier 4.
The negative input of amplifier A4 is also connected to the output of the network 18.
VERR functions as a reference voltage coupled to the non-inverting input of amplifier 48.
The potential of the non-inverter input of amplifier 21 is set at reference voltage Vref.
The negative voltage ramp is transmitted by capacitor C 5 to the non-inverting input of amplifier 15.
The output and the negative input of amplifier 26 are connected together through a resistor R8.
A resistance 14b and a capacitance 15b provide a parallel connection between the output and the negative input of amplifier A1.
The potential of this non-inverter input of amplifier 11 is fixed to the voltage reference Vref.
Third Bias DC voltage Vb is applied on the second input of amplifier 12.
The non-inverting input of amplifier 441 is connected to ground.
The collector is also connected to the non-inverting input of amplifier A2.
The input of amplifier stage 58 is connected to the output of low-pass filter 57.
A resistance 13 b connects the positive input of amplifier A1 to earth.
The input of amplifier 24 is connected to the output of a phase / frequency discriminator 27 across a resistor 30.
Resistor R2 is connected between the non-inverting input of amplifier A1 and ground.
The non-inverting input of amplifier 12 receives a reference voltage, for example, the ground voltage.
Terminal 4 represents the non-inverting input of amplifier 1.
Each input of amplifier 31 has an impedance Z 2.
Current i flowing through transistor 21 is provided at the input of amplifier 20.
The non-inverting input of amplifier A ' 1 is connected to the base of transistor T1.
The output of the mixer is applied to the input of amplifier 32 of receiver 20.
The non-inverting input of amplifier A2 is also connected to ground by a capacitor C36.
The respective outputs of the two multiplexing units 27, 28 are interconnected to the input of amplifier 15.
Wire F2 is connected to a positive input of amplifier 21.
Coupling capacitors 95 and 96 block the internal DC bias voltages on the input of amplifier 97.
A photo diode D4 made of silicon carbide ( SiC ) connects to the non-inverting input of amplifier U1A.
The emitter of transistor T1 is connected to the non-inverting input of amplifier A ' 1.
You'll also be interested in:
Examples of using Amplifier
Show more
Make sure that the amplifier is switched on
Amplifier is picking up alternator noise or radiated noise
Never operate the amplifier without cover
Examples of using Input
Show more
Do not use damaged input or welding cables
The input and output pairs are parallel
Select the desired input source correctly
