Examples of 'insert the screw' in a sentence
Meaning of "insert the screw"
insert the screw - To place or fix a screw into a designated hole or space using a tool
How to use "insert the screw" in a sentence
Basic
Advanced
insert the screw
Insert the screw and tighten it securely.
Replace the wiring cover and insert the screw.
Insert the screw in the circuit and tighten.
Knock out the prepunched part of the cover to insert the screw.
Insert the screw strip through the screw guide.
Take care to ensure that the screw holes are aligned and then insert the screw.
Insert the screw into the hole in the stabilizer.
First I tried to insert the screw.
Insert the screw nuts into the deburred pipe.
Replace the battery door, insert the screw and tighten.
Then insert the screw anchors into the holes.
After this, you have to insert the screw inside the wall.
Insert the screw that you had previously removed.
If the fan is replaced, insert the screw adding with glue.
Insert the screw provided through both of the holes.
See also
Align the new handle, insert the screw and fasten tightly.
Insert the screw back into the damper shaft.
Align the unit and terminal cover, and insert the screw.
Insert the screw into this hole and screw it in.
From the inside of the drawer, insert the screw through the predrilled hole.
Insert the screw through the hole in the cord strain.
Align the main unit and end cap holes, and insert the screw.
Insert the screw through the hole in the extension wing.
Align the new handle with the bracket, insert the screw and fasten tightly.
Insert the screw into the ball in the ball link.
From the front side of the computer, insert the screw and tighten Figure 24.
Insert the screw into the hole in the oven light cover.
Replace the hinge cover, insert the screw and tighten completely . see fig . 2.
Insert the screw through the chime base into the plastic anchor.
Unfold the base ( D ) and insert the screw ( E ) into the hole.
Insert the screw in bottom right screw hole on the back of the oven.
On the opposite side, insert the screw ( F ) from the inside outwards through the bores.
Insert the screw through the hole in the stand and the hole in the saw.
Finally, insert the screw hole plugs to the three cover screws.
Insert the screw through the item being fastened and screw it into the anchor tightly.
Then insert the screw into the top of the base and reattach the butterfly bracket.
Insert the screw through the lug into the grounding hole below the terminal block.
Insert the screw through the key into the bolt and tighten the screw with a screwdriver.
Insert the Screw into the hole located on the inside of the door.
Insert the screw provided into the hole and tighten using a Phillips screwdriver.
Insert the screw B into the desired position and tighten.
Insert the screw A into the nut.
Then insert the screw bolt in the steel tube on 3 cm.
Insert the screw through the stand, upper shaft and armrest.
Insert the screw through the mounting bracket and the heater handle, tighten the nut.
Insert the screw provided with the kit in the hole and tighten the nut Fig.1-C.
N Insert the screw ( with washer ) and tighten it down firmly.
N Insert the screw ( 4 ) through the holes in the fork, washer and bushing in the handlebar.
Insert the screw ( F ) through the bore in the cable guide G.
Insert the screw ( D ) through the hole of the bottom metal plate B.
